Complete bag front end with arms and all

[dapolice1]

Guys I have a 454 with TH400 trans that MUST go.Lots of extra and new parts. High volume oil pump 2 waterpumps, 2 starters, 2 alternators, new poly trans mount. Sold as is $550.00 you come get it. NO REASONABLE OFFER REFUSED!!!
http://img.photobucket.com/albums/v387/dapolice1/4540001.jpg

Guys let me make something VERY CLEAR. All of these Items except brake brackets and 454 I was going to use on my project. The ONLY reason I'm selling is to fund my shop. I WILL HAVE TO REBUY ALL THESE ITEMS once the shop is done. I need the cash to finish it up.

Price is for cash due when it is picked up... NO reasonable offer refused..

ALL OTHER ITEMS HAVE BEEN SOLD!!

[XtremeLowzFSC]

Can I ask where you got your slams at? I'm interested in the whole front kit. If you want to can you email me some pics of the front end setup to xtremelowzfsc@yahoo.com


Thanks

[dapolice1]

Sorry I edited that price. The $500 was for some other parts and I neglected to edit the post to remove that.

I will post pics tonight or tommorrow. I am not at home yet and do not have the pics with me.

[the_duke]

let me see what i can do about the 454 and th400 and i'll let you know if i can come up with the cash...

J.W.

[dapolice1]

Pictures added...

[dapolice1]

BTT with lowered prices. I have had alot of intrest so maybe the new pricing will help some of you on the fence. These are very good deals here...

[the_duke]

i'll take the brackets. lol. i'm gonna pass on the motor.
let me know how you want the payment?

J.W.

[Larry B]

That whole setup is not in my budget right now, but if someone does not want the spindles with the kit please let me know. I want those.
Thank you, Larry

[dapolice1]

i'll take the brackets. lol. i'm gonna pass on the motor.
let me know how you want the payment?

J.W.
PM sent on package deal and payment info for just brackets.




That whole setup is not in my budget right now, but if someone does not want the spindles with the kit please let me know. I want those.
Thank you, Larry.

I will post the spindles if they do not sale, so please check back often.

[dapolice1]

Rear Disc Brackets have been SPF to the_customizer.

All other items still up for sale..

[thecodeman]

Im interested in the slams, spindles, upper control arms. Wish you would want a trade of some sort for my ART coolride kit minus the bags:(

[dapolice1]

Im interested in the slams, spindles, upper control arms. Wish you would want a trade of some sort for my ART coolride kit minus the bags:(
I might pm me with what you had in mind. Alos consider meeting as I would be more flexible on price for pickup.

[thecodeman]

pm sent

[dapolice1]

454, trans and accessories still available.
No reasonable offers refused.....

[82chevyc-10]

Price on the slams?

EDIT: you can pm me with it or whatever also.

[dapolice1]

The Front end kit including the bags are sold pending funds or SPF. I have left them on here incase the other member can not get the funds to me in the agreed time period. If they are unable to complete the deal. It will all be sold together...
Thanks for your intrest.

[82chevyc-10]

What site did you buy the slams off of?

[dapolice1]

I did not buy them from a site sorry..

[82chevyc-10]

I did not buy them from a site sorry..

Well then what store?

[dapolice1]

Sorry I bought them from a friend who went out of business... You can do a google search or call slam for their authorized dealers... I think Larry at innovative air ride sales them, Joe at outlaw motorsports sales them, and Jason at SD sales them.

[Larry B]

Is your buyer taking the spindles also?
Larry

[Otto]

is it just me or do i just not see a price on teh front end stuff?

[dapolice1]

is it just me or do i just not see a price on teh front end stuff?
There is a price on them SPF=Sold Pending Funds....
If the current buyer can not come up with the cash then they will be back on the market. I have left it up there until the deal has been completed.
The other member is getting the ENTIRE front end kit including spindles and bags. As I said if it falls through I will update this listing to indicate everything is back on the market and a price.

I shipped the rear disc brackets I had lsted to a member and once I recieved payment I removed them. Same thing here

The engine and trans are still for sale.

[Larry B]

OK Thanks

[the_duke]

SWEET!!! My brackets are shipped!!

J.W.

[dapolice1]

SWEET!!! My brackets are shipped!!

J.W.
Yup should be there by wed.. UPS...
Thought you were in Waco or Killene?

[ur2hi]

that's mccustomize thats in killeen. jason from suicidedoors doesnt sell slams

[SITNLOWSITNFAT]

Would you let the slams go??? If yes how much???? Very interested!!!

[dapolice1]

Would you let the slams go??? If yes how much???? Very interested!!!

UMMM...

The Front end kit including the bags are sold pending funds or SPF. !!!

[dapolice1]

SWEET!!! My brackets are shipped!!

J.W.
I see the brackets arrived. Please take a moment to leave feedback in the proper forum and I am doing the same for you...

BTT Engine still up... Come on someone needs it...

[Tahoekid]

Whats the info on the 454? Year, HP, 4 Bolt, does it run?

Chris.

[dapolice1]

It is a 78-82 Passenger block 7.4 and so marked. It has the oval port heads for low end torque. I am not aware that Chevy made 4 bolt and 2 bolt blocks for the Big Blocks I know the small blocks were. It was a stock rebuild and the addition of a mild RV/ towing cam. It was in his truck for a short time until he got tired of the gas milage and went with a SBC. It came out of his I added a hi volume oil pump, new plugs, water pump, poly trans mount, fuel pump block off plate, new fram filter, fail safe thermostat, and a stainless intake and accessories bolt kit. The engine was stabbed into my dually about 8 months ago and was covered. I have not had the time to get it finished and now I need my shop built and need cash. I have not started it since it was pulled from the other truck. I am selling it as a core, but please understand that is only because I can not guarentee it because I can not start it. I did a good job of covering it and I do not think there is any reason it will not run.

[milehightoyz]

i still need that 454/400 set up for my 55 gmc project. any idea what forwardair would charge to get it to denver? or is it local pick up only?

[dapolice1]

I really do not want to ship this thing. I am sure it would be close to $1k for engine purchase and shipping to your local dock.

[496-TKO]

It is a 78-82 Passenger block 7.4 and so marked. It has the oval port heads for low end torque. I am not aware that Chevy made 4 bolt and 2 bolt blocks for the Big Blocks I know the small blocks were. It was a stock rebuild and the addition of a mild RV/ towing cam. It was in his truck for a short time until he got tired of the gas milage and went with a SBC. It came out of his I added a hi volume oil pump, new plugs, water pump, poly trans mount, fuel pump block off plate, new fram filter, fail safe thermostat, and a stainless intake and accessories bolt kit. The engine was stabbed into my dually about 8 months ago and was covered. I have not had the time to get it finished and now I need my shop built and need cash. I have not started it since it was pulled from the other truck. I am selling it as a core, but please understand that is only because I can not guarentee it because I can not start it. I did a good job of covering it and I do not think there is any reason it will not run.
Yes BBC was made in variations of 2 and 4 bolt mains.

[dapolice1]

Yes BBC was made in variations of 2 and 4 bolt mains.
I would be lieing if i said one way or another, because I do not remember since I had the pan off. I want to say it was 4 bolt because I thought all BBC were 4 bolts.

As far as the engine goes guys maybe this will help some of you out?..

I will do $550 on the engine and stuff if you can meet this guy on your
end. It is about a 2 hour drive for me to meet him but I will if it will
help you out.

http://67-72chevytrucks.com/vboard/showthread.php3?p=1185785#post1185785

Does this help anyone?
I am getting lots of intrest just the shipping is too much.

[dapolice1]

Guys the front kit I had listed and KP kit where SOLD as well as the rear disck brackets.

I still have the 454.

[the_duke]

Just noticed about the rating in the member rating forum. I'll post up there in shortly after! Sorry about the wait man.

J.W.

[Tahoekid]

Why dont you save the 454 for the 67 thats in your sig?

Chris.

[Bagged02]

i still never ever seen any bag products in that first post or any others. just the engine

[Izzy]

i still never ever seen any bag products in that first post or any others. just the engine
He removed it I'd imagine since it was sold.

[milehightoyz]

I ship engines forwardair all the time generally around $2-300 or so