DLS A3 over Genesis Dual Mono

[DSZ71]

http://dls.se/english/Test_reports/dls_a3_polen.htm

[gabe8501]

http://dls.se/english/Test_reports/dls_a3_polen.htm

So our amps aren't crap??:head:

[DSZ71]

Guess not...

[Exalted512]

cliff notes?
-Cody

[gabe8501]

cliff notes?
-Cody

Ultimate A3 is a decent little amp. Do you have your components in your truck Cody?

[95stroked1500]

yep, don't let that "made in taiwan" sticker fool you. great amps.

[DSZ71]

Hey Gabe, talking of installations...got those LPGs installed yet mane?

[Supa_c]

DLS amps are pretty sick looking.
I did an install with a A3 and A4, sadly i didnt get to hear it. Time ran out :(

[gabe8501]

Hey Gabe, talking of installations...got those LPGs installed yet mane?

Yes sir. I had to use an extra set of a-pillars I had sittin' around..... those little guys need a mounting hole quiet a bit larger than the CDT's I have in there now.

Compared to the CDT UpStage tweets the LPG's seemed pretty bright... almost harsh to me. I adjusted the eq on the h/u and they sounded nice at low-moderate volumes, but still sounded a little bright at higher volumes. I don't know if they didn't like the UpStage crossover they were being used with or if they just didn't suit my ears. I'm gonna swap them out with the DLS tweets in the doors and see how they sound, then I may disconnect the UpStage kit and see how they play with the DLS equip alone.

If I end up not liking them I'll sell'em at a good price.:D I'll use all the DS sales tactics; "Take'em off my hands before my wife finds out I have these. Big clearance sale.... Buy one and I'll give you the second one at full price!"

[DSZ71]

These tweets like xover points of around 2.5khz and up...check what the CDT and the DLS xovers cross at...Can you run these off of the h/u filter if possible?

If you like, I may buy them back off of you...

[gabe8501]

These tweets like xover points of around 2.5khz and up...check what the CDT and the DLS xovers cross at...Can you run these off of the h/u filter if possible?

If you like, I may buy them back off of you...

I'll see if I can find out where the crossover are x'ed at. I actually read that, about the 2.5khz, on the DIY site you posted the other day... but most of that is over my head. How would I run them off the h/u filter?

Sure, let me try them in the doors first. If I still don't like them I'll let you know mang. I also have 3 flush mount cups and 3 swivel mount cups.

[DSZ71]

Where is the upstage kit getting its power from? A separate amp or the same amp as the front comps? If you are using a separate amp, you can control via your HU the signal that is fed to that amp...

[gabe8501]

Where is the upstage kit getting its power from? A separate amp or the same amp as the front comps? If you are using a separate amp, you can control via your HU the signal that is fed to that amp...

Same amp for comps and upstage kit.

[Exalted512]

theyre in the stock locations right now running off a small RF 350S. I dont have the midrange hooked up though. Hopefully i can start playing with staging soon and start fiberglassing:D
-Cody