Corsa Widemouth Dual exhaust question

[chevycrew06]

Doe's anyone have this exhaust? I'm considering it, any feedback would help. It's part #14276. This is the only pic I found. It's the widemouth, last image on right. Also, will this work with a roll pan? If so, doe's it stick out? I have a 2006 Chevy Crew.

http://i79.photobucket.com/albums/j153/chevycrew06/rearexitpairs.jpg

[TigerEyz3]

Don't have the tips you are referencing, but looks like you are looking at exhaust tips rather than the exhaust system...

As far as the tips working with a roll pan, shouldn't be a problem as long as you have enough clearance around the tip. To answer your question about the tips sticking out past the rollpan, that depends on how they are mounted... if you want them to stick out, leave the piping a tad longer. If you don't want them to stick out as much, trim the exhaust piping a little more. Also, the height you select on the exhaust piping will determine where the tips exit in the rollpan.

[YenkoST]

It should work with a rollpan but you have to cut some of the tubing to get the tip to sit back a little compared to the bumper.

Oh, my brother has the exhaust....it sounds sweet. Nice and crisp idle and a great WOT.

[chevycrew06]

It should work with a rollpan but you have to cut some of the tubing to get the tip to sit back a little compared to the bumper.

Oh, my brother has the exhaust....it sounds sweet. Nice and crisp idle and a great WOT.

that is bad.. ashhhh appeciate it bro. Got any pics?

[YenkoST]

I'm away at college so sure don't. But...its not bad....we did it...just took a saw and cut about 6"s off and put the tips right back on.