92 to 95 interior swap Door lock problem!!

[bknyaic]

I just did my door panel swap in my 92 .So everything looks like the 99 denali inTerior door panels. I was able to wire up the power windows with no problem on both doors and also the passenger side lock switch works both doors fine.But heres my problem I wired up the drivers side door lock switch to the new 95 switch and cant get it to unlock the doors !It only locks the doors .These were the wires on my switch :ORANGE/BLACK STRIPE (POWER),bLUE (works the locking part of switch) ,then I have 2 black wires which are grounds. and finally instead of a black wire with red stripe I have a solid black wire and it is suppose to be the unlock wire but it doesnt unlock it.On the passenger side I have a tan wire that unlocks the doors .Has anyone come across this problem with their conversion?

[cordatta]

i know that on mine when i did it i had to go to the junkyard and use the door lock relay that is mounted above the gas pedal on the 95+ dashes. my problem was that i could do the windows but had no door locks at all. maybe this is part of your problem?

[bknyaic]

It could be ! What does that relay look like? Would you be able to take a pic of it?

[richter]

It could be ! What does that relay look like? Would you be able to take a pic of it?

I'ts a little black box with wires coming out one end, like 8 wires in a row or something, not sure exactly. I had to put it in when I did mine too. You for sure need it if the truck u got ur new stlye door panels out of had keyless entry. The black box is like 2 square inches or something, not very big