PDA

View Full Version : RCA length for NBS xcab



vonerick
07-28-2006, 04:39 AM
running a 4ch amp under rear seat or back wall, what length cables should i get??????

TWKTCC
07-28-2006, 07:51 AM
running a 4ch amp under rear seat or back wall, what length cables should i get??????Take a piece of string or wire and route it loosely through the truck how you intend to run it to your locations, measure it and then go buy what you need. Always round up to the next length, better to have a lil extra then not enough.

///M5
07-28-2006, 03:11 PM
4m is typically a bit long and 3m too short, but the string/wire running first to measure is always the best bet. Only after you do it will make you want to build custom cables, lol.

Exalted512
07-28-2006, 06:15 PM
shortest id go with would be 14', preferrably longer
-Cody

joakwin
07-28-2006, 08:45 PM
i think i used some 20 ft rca's

they were way long

Lurius
07-29-2006, 10:07 AM
I ran my RCAs more or less straight from the headunit, behind the glove box, then under the passenger seat and straight back to the amps on back cab wall. 5m(20ft) was way too long, by like a yard. 4meter should be great, allows you to have some slack if you ever need it.

-Lurius

stocktires
07-30-2006, 07:50 PM
17ft I put in today was perfect. I ran it from the deck, up the door still plate and behind the back seat.