View Full Version : Need help fast guys please!!!!!!
05-03-2007, 02:31 PM
Well I decided to fab a air ride system for my '78 so I finished my 4-link and rear setup installed bags eveything was cool... Till I tried to install the front; when sitting at ride height the front bags were fully collapsed; am I supposed to cut any thing to lay the thing out and still have travel,ie(spring pockets) I have 2600 lbs bags and drilled the flange on the spring pocket and made up a mounting plate for the bags. Please help any picks would help?
05-04-2007, 06:58 AM
Sounds like you need some lowering spindles and/or lower control arms.
05-05-2007, 03:20 PM
Do tell how will they correct my problem
Let go dudes I need to finish this thing up
05-05-2007, 06:24 PM
if you replace your spindles with drop spindles, it raises the spindle up a few inches so that the truck will sit lower, if your still running 15 inch tires, dont use a 3 inch drop spindle, use a two and a dropped lower control arm, but if your running any wheel size bigger than that. use a 3 inch. should get er right on the ground.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO