View Full Version : Performance TBI parts FOR SALE
dhall
08-15-2007, 06:48 PM
Almost new (very little miles) 50mm TBI with 50mm spacer from xtreme-fi - ?
90lb injectors w/pod (from xtreme-fi) - ?
GMPP TBI (bored to 50mm) intake for VORTEC heads - ?
email: derekhall80@yahoo.com
NorCal_z71
08-15-2007, 09:00 PM
possibly interested in the autoprom, need to check a few things
dhall
08-19-2007, 03:47 PM
Everything has been put up on ebay. See the auction forum for links. I'm waiting to get the intake blasted nice and clean before I put it up on ebay.
dhall
08-23-2007, 04:08 PM
GMPP TBI Intake for Vortec Heads
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=120154540137&ssPageName=STRK:MESE:IT&ih=002
MSD Blaster Coil
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=120153164609&ssPageName=STRK:MESE:IT&ih=002
Autoprom
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=120153163240&ssPageName=STRK:MESE:IT&ih=002
7747 ECM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=120153161607&ssPageName=STRK:MESE:IT&ih=002
EBL ECM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=120153159472&ssPageName=STRK:MESE:IT&ih=002
Stock Distributor w/accel ignition control module
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=120153157105&ssPageName=STRK:MESE:IT&ih=002
50mm throttle body w/spacer
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=120153155488&ssPageName=STRK:MESE:IT&ih=002
90lb injectors w/pod
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=120153153675&ssPageName=STRK:MESE:IT&ih=002
ABS control module
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AMESE%3AIT&viewitem=&item=120153151447&rd=1
Cruise Control Unit
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AMESE%3AIT&viewitem=&item=120153149598&rd=1
dhall
08-24-2007, 07:25 PM
bump
dhall
08-25-2007, 06:50 AM
I've lowered the starting price for the EBL computer.
dhall
08-25-2007, 04:30 PM
I must be crazy, but I've lowered the price on the EBL once of again. It is a steel at this price.
BLOWN91350SS
08-26-2007, 01:19 PM
Wish it was the EBL flash
bizzybone485
08-26-2007, 01:43 PM
got sick of trying to tune a tbi? Just curious but why did you switch to carb after having ran all these components?
dhall
08-26-2007, 02:01 PM
The flash came out a couple of months after I bought my, now classic, EBL. :rolleyes:
I'm switching to the carb because I'm ready to go play on the streets with some buddies of mine, and there is no way that a TBI is going to be able to compete with what they are bringin'. Plus the engine bay is going to look 10 times better with the couple miles of wire that got removed. All the wires that deal with the TBI and ECM are history. :rocking:
dhall
08-27-2007, 02:21 PM
Everything Has Been Sold, If Anything Falls Through I'll Repost.
dhall
08-27-2007, 02:22 PM
Correction, the intake manifold auction is still going on until tomorrow.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
SEO by
vBSEO 3.6.0 PL2