PDA

View Full Version : Is my component blown?



justinp95
10-14-2008, 12:25 PM
Is my component speaker blown? It started acting up a few days ago. It makes sound but hardley any sound. The amp is only like 60 watts...

Undisputed King
10-14-2008, 11:32 PM
Well look at it, smell it. If the cone is busted then obviously you need a new speaker. If it smells burnt then your coil is fried. If its none of those then I would suspect the wiring not getting through to the components. My speakers would make funny noises once in a while, like ugly static noises, and popping noises, and they would play very lightly, and i confluded it was my amplifier making the speaker do funny things, it had to do something with the crossover switch, cause when i wiggled it it would clear up the signal. So just start from the source and work your way through

framedraggin'94
10-14-2008, 11:39 PM
check ur crossovers

justinp95
10-15-2008, 09:05 AM
Ok, Ill check the crossover.

justinp95
10-15-2008, 11:46 AM
I checked the cross over, but everything is tight and good to go...what now?

drpd93
10-15-2008, 01:41 PM
sure the amp's putting out? try it on a different speaker.

justinp95
10-15-2008, 01:51 PM
Hmmm, good idea. Ill swap the wires and see if that changes anything.