View Full Version : gauge cluster change out
10-19-2008, 03:35 PM
I have a 94 GMc k1500 pickup. My cluster does not include the rpm tach, only has the speedometer,oil,temp,battery,and gas. If i was to buy a gauge cluster for like a 95(only ones I can find), what will I have to do to install it? Also my oil/bat/temp/gas is all in the 4 corners. Anyone know how to go about this, or any good sites to find one? Is my truck already prewired for the rpm tach, or do I have to wire it myself. Thanks
10-19-2008, 09:48 PM
A 95 cluster won't physically fit into your dash.
The clusters compatible with your 94 are from the years of 92 through 94. It's more common to find a tach cluster on 94's than the other two years, so you just need to hunt a little harder.
As far as the wiring, it's the same, just get the cluster and put it in.
10-20-2008, 10:50 AM
He`s right a 95 wont fit , but if you get a 91-94 with a tach it will work and most all trucks were prewired for a tach.
I changed mine out , I didnt have a Tach got one of Ebay with a Tach , put it in works great no problems.
10-20-2008, 11:12 AM
92-94. Not 91. Completely different electronics. That's why I said 92-94. :D
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO