Need help from guys who have made their own EDC brackets

[jays88chevy]

I will be fabing up a bracket to mount my york 210 to. I have an 88 350 5.7L. I was wondering if anyone has any pics of where they mounted the bracket to the motor. I'm not a 100% sure where to bolt it to. Any help would be appreciated. Thanks

[hardluck]

I have the 4.3 on mine, and I made my bracket in 3 stages out of 1/4" plate, then welded it together. I made a piece that bolted to the head, made a plate for the compressor to sit on, then made a bracket that bolted to the alternator using the factory hole, then welded them together.
http://i253.photobucket.com/albums/hh79/reflektrkollektr/P6010139.jpg
http://i253.photobucket.com/albums/hh79/reflektrkollektr/P6010137.jpg
http://i253.photobucket.com/albums/hh79/reflektrkollektr/079.jpg
Unfortunately I didn't think to take pictures while I was building it...I was too worried about getting it madejust right lol.

[jays88chevy]

Thanks, looks good. Where did you get your clutch from? I still need to find one.

[drpd93]

on my 4.3 i took out my ac compressor and mounted mine sideways there. it was pretty simple.

[hardluck]

Thanks. My girlfriend actually picked the clutch up for me from a big-rig parts place in town. It's for a Kenworth, I believe. It was cheaper there than getting it from Autozone too

[Marcos]

Thanks, looks good. Where did you get your clutch from? I still need to find one.


$81

http://www.ryderfleetproducts.com/cgi-bin/ryderfp/products/srm/oid/47299/erm/product_detail.jsp