anyone ever do a 1" body lift?

[vic_V8]

I was thinking about doing it, but wasn't sure what it would look like with out moving the bumpers, I plan on moving the bumpers later, but leaving them for now.

Also, I found aluminum pucks, but couldn't find the nylon ones, anyone have a site for that?

[flatblack83]

A one inch wouldnt look bad with a body lift since the bumpers wouldnt be that far off. I have a 3inch with the bumpers moved up, 8inch suspention and 39s......

[350 sbc ftw?]

imho..i wouldent do it.. thats just me tho..

[leveldowen]

Is there some reason you want to do a 1 inch body lift? Seems like a lot of work unless you really need the little bit of clearance for something under the hood or something like that.

[vic_V8]

Is there some reason you want to do a 1 inch body lift? Seems like a lot of work unless you really need the little bit of clearance for something under the hood or something like that.


just keeping it legal

[460willy]

I know of millions of trucks running 3 inch body lifts on IL roads if you get pulled over and the cop gives you a ticket for having too large of a lift you must have other issues going on at the same time. But it is your truck. Have you looked into hockey pucks I used them of body mounts once a long time ago. Also 4 wheel parts wholesale used to sell body mount material it was basically a hard rubber tube about 3 inches around with a 1/2 inch hole in the middle and you just cut it to length alot of Jeep guys use it. Good luck and keep us posted

[trickedout420]

i have one i put it in when i installed my poly cab bushings..i like it personally gives that extra bit of clearence places

i used this kit http://offroaddesign.com/catalog/oneinchlift.htm