Fuel line fitting size

[Stroked385]

I want to go from the hard lines to Braided but i dont want to cut and use hose clamps to do so.

What is the size of these fittings ? 1990 chevy rcsb 5.7

Thanks
http://i223.photobucket.com/albums/dd269/2savage4you/001-32.jpg

[Justin_Inc]

fuel filter is:
http://www.summitracing.com/parts/AER-FBM2608/

the other one i'm not sure, never messed with taking it apart. but you can use providing its 3/8" line which i'm fairly certain the feed/return line sizes on TBI trucks were.:
http://www.summitracing.com/parts/RUS-639200/

[randeez]

16mm 1.5 feed and 14mm 1.5 return

[GreaseDog]

http://www.summitracing.com/parts/EAR-991954ERL/
http://www.summitracing.com/parts/EAR-991955ERL/

[Stroked385]

http://www.summitracing.com/parts/EAR-991954ERL/
http://www.summitracing.com/parts/EAR-991955ERL/

Well were getting closer, shouldn't the top fitting have Female threads? Atleast thats what i see in the pic:dunno:

How long would it seal if i just cut and used hose clamps for awhile? Im using SS braided hose so.... Trying to get this together and get it out of my X g/f's garage A.S.A.P

[randeez]

http://www.summitracing.com/parts/EAR-9894DBHERL/
http://www.summitracing.com/parts/EAR-9894DBJERL/

[Stroked385]

Ok this one i have. just need to get a new O ring for it
http://www.summitracing.com/parts/EAR-9894DBHERL/All/

Now i need this one for the filter end and im set........
http://www.summitracing.com/parts/EAR-991954ERL/All/