current exhaust setup+tip=better?*pics*

[chevyteeruk]

My current exhaust setup is as follows stock headers, to a brand new Y pipe, to a 3 inch thunderbolt hi flo cat then to a 2 1/4 thrush fully welded muffler 45 out before back tire. single pipe no duals becuz of the transfer case and gastank not making it worth it.

The question... if i cut the pipe then welded a tip onto it will it make a difference? The tip would only beable to be 6 or 8 inches long maybe.... would it make more tone,deepness, or noise?
http://i26.tinypic.com/jifbib.jpg

http://i31.tinypic.com/105d6zd.jpg

[SlvrdoHDmax]

It wont make much difference unless you put at least a 16" tip on it. Cant you just cut the pipe, and have the tip coming out from under the truck?? An 18" tip or maybe a little longer would be optimal.
and yes it would be deeper with more tone

[chevyteeruk]

the problem with that is the pipe bends downward then bent upward so the exit is pointed straight out... if i cut it then put a 18in tip on then it will probably be directed at the ground. i guess its not worth doing.