PDA

View Full Version : cant get my 01 chrysler sebring running, help!



leggomieggo10
09-19-2010, 01:31 PM
my dd is a 01 chrysler sebring. 100k on the clock. it was running great until one day it just cut off while i was driving. now it wont start. ive narrowed it to be a fuel problem. i changed the fuel pump, still got nothing. so i took the intake off to see if the injectors were firing. well only two injectors are firing. #2 an #6.. so i changed all the injectors, same thing, only the two would fire. so than i changed the wiring around, example, i took the wire from 6 an put it on 1,3,5 an 4 an than they fired. so i figured well maybe my wire harness is shot. went and got another wire harness. well same thing only two injectors fire an if you switch the wire around they all fire..

im stumped i need help
ps this car does not have a fuel filter so its not that.

please and thank you

RednckChevy
09-19-2010, 11:21 PM
hmm maybe its the computer itself have you run the diagnostic check through the dash...turn ignition on and off 3 times and wait for codes on the odommeter

leggomieggo10
09-20-2010, 04:49 PM
not throwin a code, any other suggestions??