View Full Version : Oil pump upgrade
BushC
05-15-2011, 10:21 PM
Does someone make a high pressure standard volume oil pump for the l31?
RPMbagged97
05-16-2011, 06:42 PM
unless your running high rpms or a ton of hp a high pressure pump isn't needed, and I believe will actually hurt the performance due to the extra drag on the bearings.
BlacK20
05-16-2011, 06:47 PM
Use a stock replacement, no need for a HP pump.
skylark
05-16-2011, 10:16 PM
I have a fresh vortec 5.7 that cold idle is 80psi and hot idle is 60psi. It is using a stock pump.
BlacK20
05-16-2011, 10:43 PM
I have a fresh vortec 5.7 that cold idle is 80psi and hot idle is 60psi. It is using a stock pump.
:word:
gmctrucks
05-17-2011, 03:04 AM
Use a stock replacement, no need for a HP pump.
I agree 100% if you install a high volume pump your going to need a bigger oil pan because it will use all the oil fast at a high RPM and mess up your engine.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
SEO by
vBSEO 3.6.0 PL2