dromero5
07-12-2011, 11:27 AM
Wake up your lazy 87-95 TBI or L98 type motor. I have (2) 454 80#/hr injectors that have about 20000 miles and work great. Also have (2) Stock 350 55#/hr injectors. Have (2) TBI Throttle bodies, one is a bored 50mm SBC Throttle body and the other is stock. Have (2) Edelbrock 3704 Performer TBI intakes, one is stock and the other has been bored to 48MM. Have (16) Trickflow roller rockers that are the 1.6.1 ratio, have about 3000 miles on them. (2) 1986 and under SBC chrome valve covers. Have a 383 builder block. cam went bad after 3000 miles. Has SCAT crank setup with KB 135 hyperuetectic pistons and has the bosses for a hydraulic roller cam. Needs to be disassembled and cleaned. Last but not least I have (2) Trickflow cylinder heads P/N 30400006. These are the 195 cc intake runners ,with 2.02/1.60 valves. They have 64cc volume combustion chambers that are CNC profiled. Only have 3000 miles on them. They have 1.470" valve springs and are good up to .540 lift. They are the 87-1995 direct replacement heads for the centerbolt heads, although will bolt into pre-1987 SBC. Call with questions or email at d_romero5@yahoo.com and if you want pics. 970-765-6536 I can ship most of the parts I live in Colorado.