obs parts

[dishow]

parted 6 trucks building mine. i have a two story garage FULL of obs parts. i am only shipping the smaller stuff.i have lots of interior parts,wiring harnesses,computers,bumper brackets,headlights ,tailights,wiper motors, heater controls ac/non-ac,........................you get the idea. the large heavy stuff like doors,tailgates,seats,hoods,fenders,grills,ect. are for local pick up only.i can get pics of what you need.most of it is 88-94.i parted 1 1996 truck so i do have some pieces from that. i will add some pics as examples of what i have.too much to itemize. here you go..................

http://i175.photobucket.com/albums/w143/dreeve30/8894%20truck%20parts/023.jpg

http://i175.photobucket.com/albums/w143/dreeve30/8894%20truck%20parts/2011-04-30_13-26-51_227.jpg

http://i175.photobucket.com/albums/w143/dreeve30/8894%20truck%20parts/2011-04-30_13-28-23_760.jpg

http://i175.photobucket.com/albums/w143/dreeve30/8894%20truck%20parts/2011-04-30_13-53-46_555.jpg

http://i175.photobucket.com/albums/w143/dreeve30/8894%20truck%20parts/2011-04-30_13-21-06_364.jpg

[Coburn]

Do you have...

The driver side harness for OBS power windows and lock system?
The rods that connect the power lock actuators to the lock? Both sides..
The door panels that have the switches in them... AND the switches, both sides... Here's a pic of mine (non power):

http://i275.photobucket.com/albums/jj290/coburnwar/0819111520a.jpg

[dishow]

hi. as of right now, I have the harness for the driver side and the panel. no rods or switches.

[Coburn]

You have both panels? Driver and passenger?

I only need the connector housings from that harness, if you know what I'm talking about... Would ya sell me that or the whole thing?

I need the "housings" for the connectors on the right of the pic. Should end up looking like the ones on the left...

http://i275.photobucket.com/albums/jj290/coburnwar/0819111947.jpg

Can I get a pic of the grey door panels?

[dishow]

i would sell the whole harness only. i believe i have both side panels like pictured above(but for power)if i do,it will $55+ship.let me know and ill get a pic.thanks.

http://i175.photobucket.com/albums/w143/dreeve30/8894%20truck%20parts/2011-04-26_16-11-19_938.jpg

[Coburn]

Not too sure on the price... Don't want the whole harness but I understand how you don't want to split it up..

Can you get a pic of the door panels? And how much shipped to 83234 for just the 2 panels?

[dailydragger]

Any bucket seats?

[dishow]

i have a passenger side high back in gray.no base.$100.

[mumbling_rednec]

was the 96 power windows and locks if so do you have the harness from door to door and the black panels that have the motors and locks on it?

[GirchyGirchy]

Got any grey '98 dash vents for the driver's side?

[dishow]

the 96 did have power but those parts are gone sorry.

i have a tan dash surround with dash vents for sale for $50. pic in other thread if interested.

[scotty97]

do you have the hood release pull from the kick panel? mine ripped the center out of it.

[circuitguy]

Do you have the cruise control unit out of the 96 available?

[vidrine1214]

need an 88 a?c controller

[dishow]

Do you have the cruise control unit out of the 96 available?

no sorry.all i have left from that 96 is some interior pieces.

[dishow]

need an 88 a?c controller


i have one from a 93. i think the only difference is that they went to a charcole gray color in 90 as opposed to a black unit in 88-89. $40 + $10 shipping.let me know.thanks.

http://i175.photobucket.com/albums/w143/dreeve30/HPIM1246.jpg

[Speedjunkiejp]

got a maroon glove box door?

[wmiller1337]

Got a pair of seat risers? And maybe (crosses fingers) a complete center console?

[dishow]

Got a pair of seat risers? And maybe (crosses fingers) a complete center console?

for what kind of seat? i have a 60/40 split with risers. the "40" side will also work for bucket. $45+ship. i also have a tan console..................but im keeping that one.

[Joetrocker88]

i have blue bucket seats ( power driver. ) and blue center console perfect for sale 717 891 -2871

[Speedcult]

Looking for Driver door panel (power windows and locks) and both sun visors - 94 Sub K1500.
Will include extra cash if they're blue :) save me from having to match them for WAF.
Shipping to 85118

[$BiggBoy$]

Hey I'm looking for the hvac controller for a 95 suburban. Do you happen to have one?

[jb034]

I need an hvac for a 95 also man were in the same boat

[two1nine]

Any dash harnesses left? I have a 97 4.3 no cruise no fog

[dishow]

my stuff is mainly 88-94 parts. no 95+ hvac or wiring harnesses,sorry. i have 88-94 style door panels in red,but too big to ship.thanks.

[BOTTLEDZ28]

I am looking for a grey RH seatbelt assembly for a 94 2 DR Blazer.

[noj akrog]

PM sent

[bananabrain]

How much for a pair of tail lights? Since there all the same from 88-98. Doesn't matter if it has the bulbs & circut board.

[dishow]

$40 shipped

[bananabrain]

$40 shipped

I'll have to pass, I can get some brand new from TYC for about $30 shipped.

[corycarlo]

Where in pa are you located? I'm very near Williamsport. There are a few things I'm in need of...

[dishow]

Where in pa are you located? I'm very near Williamsport. There are a few things I'm in need of...


pm sent

[Ironskull]

Do you happen to have a driver's side interior door panel with the arm rest in gray for a 1992 Silverado Ext. Cab K-1500? I seriously just need toe arm rest but I know they are a pain to remove without breaking the plastic mounting studs.

[bradautotech]

seat levers both recline and some on seat cushion? bottom not sure what they are for any color is good shipped to 70808

[vicious406]

:help:still have any parts left? need under dash wire harness for a 93?and door harnesses for 96-up

[KrisW]

You wouldnt happen to have the driver side seat back recliner lever (i dont know the actual name) would you? Preferably in gray? That would work on a 97 z71?

[Regerfab]

Hey im looking for some interior parts if you could help me out

the list:
Steering wheel (4 spoke) '90
Shift knob for a manual
Front Red speaker Grilles
Side moldings, black/red for a short bed std cab

let me know if you have anything

[Nate3531]

Do you have a dash gauge cluster with a tach? (from 88-94) if so, how much shipped to 72450?

[broncoman94706]

I need a dash pocket for a 97 Silverado. I took outhe stock CD player. You have one? If so how much and how much to ship to 94591?

[dishow]

:help:still have any parts left? need under dash wire harness for a 93?and door harnesses for 96-up



i have a few under dash harness. one a believe from a 93 chevy silverado. $125+ship

[dishow]

guage is sold.thanks.

[dishow]

You wouldnt happen to have the driver side seat back recliner lever (i dont know the actual name) would you? Preferably in gray? That would work on a 97 z71?

have a gray set for 88-94.

[dishow]

regerfab______ive sold all that u asked for already,sorry.

[dishow]

I need a dash pocket for a 97 Silverado. I took outhe stock CD player. You have one? If so how much and how much to ship to 94591?

already gone.sorry

[KrisW]

have a gray set for 88-94.

Will they work on a 97? I honestly dont know. I will check. How much are you asking? to 75656

[Bamfster]

Looking for an under seat jack storage box (don't need the jack) preferably in red/maroon.... 92 ext cab.

[Wlfman]

97 power mirror switch and both window switches??

[dishow]

Looking for an under seat jack storage box (don't need the jack) preferably in red/maroon.... 92 ext cab.

sorry,i dont have it.thanks.

[dishow]

97 power mirror switch and both window switches??

no switches.thanks.

[Black91c1500]

This is going to be a stupid request but I have no idea where to get this so hopefully you can help. Anyway, do you have the speaker bolts for the rear speakers that go in the pillar and the bolts for the speakers in the dash?

Also, do you have a headliner with the visors?

I just noticed that you have tailgates listed in your first post too, do they work? I could use one. lol

[zbeast]

What if any, dash and door panels do you still have?

[dishow]

This is going to be a stupid request but I have no idea where to get this so hopefully you can help. Anyway, do you have the speaker bolts for the rear speakers that go in the pillar and the bolts for the speakers in the dash?

Also, do you have a headliner with the visors?

I just noticed that you have tailgates listed in your first post too, do they work? I could use one. lol

yes I have the screws($1 each),headliner(std and ext cab)=$50,visors need to be recovered,sagging material,=$20/pair,and tailgate=$75.

[dishow]

What if any, dash and door panels do you still have?

have plenty of panels,but wont ship these anymore.shipping way too expensive,local pick up only.

[Black91c1500]

I'll buy them, where are you located in PA?

[spike_akers]

i was wondering if you had any dashes or tailgates for 89-91?

[dishow]

I'll buy them, where are you located in PA?

pm sent

[dishow]

i was wondering if you had any dashes or tailgates for 89-91?

yes. i have two dashes.great condition,no cracks. have one in red/maroon, and one in blue. also have tailgate. cant ship these parts due to size.

[ragenasian]

I have to say that dishow was a great person to deal with. My truck here in Germany thanks you for your help and you taking your time to ship those parts to my military address. Thanks.

[cdbformula]

I need the vents and the clips that hold the center trim peice on. The peice with the tape deck in it. I bought and aftermarket radio and installation kit but it doesn't come with the vents or clips. Also I need the winsheild wiper fluid canister. Mine broke off. And the wiper arms also.

[cdbformula]

Also do you have the cup holders the mount to the bottom of the dash?

[dishow]

I need the vents and the clips that hold the center trim peice on. The peice with the tape deck in it. I bought and aftermarket radio and installation kit but it doesn't come with the vents or clips. Also I need the winsheild wiper fluid canister. Mine broke off. And the wiper arms also.

washer tank/pump=20
wiper arms/pair=20
aftermarket dash piece with vents and clips(dont want to tear apart a complete piece)=20
i would due a flat rate for shipping=25

I am out of cup holders at this time.

let me know if you need these or any other parts. thanks

[dishow]

I have to say that dishow was a great person to deal with. My truck here in Germany thanks you for your help and you taking your time to ship those parts to my military address. Thanks.

thanks for feedback,man. great to hear. i try to be fair with pricing and shipping.just glad to help people keep these trucks going! thanks again.

[dishow]

washer tank/pump=20
wiper arms/pair=20
aftermarket dash piece with vents and clips(dont want to tear apart a complete piece)=20
i would due a flat rate for shipping=25

I am out of cup holders at this time.

let me know if you need these or any other parts. thanks



http://i175.photobucket.com/albums/w143/dreeve30/2012-03-18_14-49-57_270.jpg

[dishow]

sorry,i dont have it.thanks.

found one!

http://i175.photobucket.com/albums/w143/dreeve30/2012-03-18_14-30-12_433.jpg

[bdubyah]

Do you have the dash piece that wraps under the steering column in blue that would fit a '93? Also could use a set of those power window/lock door panels if you still have a set. And the gauge bezel that goes around the cluster and hvac controls. Looking for one with all the little pieces still intact where the factory switches usually went.

Let me know what you've got and prices shipped to 38469. Thanks a bunch!

[dishow]

Do you have the dash piece that wraps under the steering column in blue that would fit a '93? Also could use a set of those power window/lock door panels if you still have a set. And the gauge bezel that goes around the cluster and hvac controls. Looking for one with all the little pieces still intact where the factory switches usually went.

Let me know what you've got and prices shipped to 38469. Thanks a bunch!

all i have left that you request is door panels,but wont ship due to size,sorry.thanks.

[dpilot83]

i have a tan dash surround with dash vents for sale for $50. pic in other thread if interested.

I'm not sure where the other thread is. Link if it's still available?

[1997Chevy!]

Do you have a leather arm rest for the 96? Or center console cupholder insert or driver and passenger visors? Please pm me if you do Im not real good with the site and don't check it much.

[dishow]

I'm not sure where the other thread is. Link if it's still available?



http://i175.photobucket.com/albums/w143/dreeve30/8894%20truck%20parts/011.jpg

[dpilot83]

Sorry for wasting your time. I was confused and didn't realize you were referring to the 96' in that post.

[Bhunter527]

Do you have a tan drivers side interior door handle trim piece? Same color as the dash posted above?

[dishow]

Sorry, doors were sold complete thanks

[**HeRbIn**]

do you have a blue fuse box door or a stock tire jack?

[dishow]

I don't have a cover but I do have a jack. $50 shipped.

[bdubyah]

Do you have any bezels left that surround the switches on the door panels? I need ones that have power windows and locks. Also looking for a black HVAC unit. Thanks.

[dishow]

I have bezels from 90-94. Do have hvac but it's gray. Will do $65 shipped on all if interested Thanks

[bdubyah]

Don't need the HVAC unit then.

Are the panels the ones that use the rounded switches and not the rectangle style? I need the one that use the rounded switches. If they are, let me know a price. Thanks.

[dishow]

Yes,rounded. They were pulled from a 93 Silverado. $30 shipped. Thanks

[bdubyah]

Cool. Just pm me your info and I'll get the money sent.

[ladyzm18]

Got a 98 obs ac controller?


Sent from my iPhone using Tapatalk

[dishow]

Sorry. I don't.

[CjAl]

i need a passenger side power mirror assembly and hvac control for my 92

[dishow]

I have a hvac. $45 shipped. Thanks.

[ladyzm18]

Underhood light assembly... For 98


Sent from my iPhone using Tapatalk

[dishow]

I jave underwood light pulled from a 94. Is it the same ? $30 shipped Let me know

[ladyzm18]

Hmm don't think so it has a ground wire and plug


Sent from my iPhone using Tapatalk

[Mr.350]

I need a drivers side window switch bezel for a 95 C1500. Gray please, and dont need the switch just the plastic piece with metal mesh over tweeter area.

[olympia lowlife]

You have any good hvac actuators for a 94?

Sent from my ASUS Transformer Pad TF300T using Tapatalk 2

[Big Daddy Diver]

Looking for the center vent section from a work truck with the pocket, no cassette or EQ.
Shipped to 32428

[Benfolio]

For my '97, looking for one map light out of the overhead console, a right side dash vent in blue, and a blue seatbelt anchor cover if you got it.
Shipped to a business address, zip 53228

[Pitbull2o08]

I need interior door handle assembly (or just handle) for 1998 drivers side. Maybe some other stuff, but deff. that handle

[joe98chevy]

can i have the price of the seat risers from that "40"
shipped to 93257 thank you

[dishow]

Seat riser is already sold

[antmike]

I need the a pull strap and the hardware off of door panel (maroon)....i also need steering arm (i believe that's what its called)

[Blakestuhh]

Do you still have the hvac control?