PDA

View Full Version : Cleaned/Detailed Engine Bay.....



MADS99
09-26-2011, 01:59 PM
Over the Weekend I worked on Cleaning/Washing and then Detailing/Polishing the Chrome/Billet parts in the Engine Bay of my Truck, So here are a few pictures,


http://i392.photobucket.com/albums/pp9/99HEATBEAT/DSC00057-1.jpg

http://i392.photobucket.com/albums/pp9/99HEATBEAT/DSC00053-1.jpg

http://i392.photobucket.com/albums/pp9/99HEATBEAT/DSC00063-1.jpg

http://i392.photobucket.com/albums/pp9/99HEATBEAT/DSC00069-1.jpg

bayko
09-26-2011, 02:22 PM
That looks incredible. Great job

MADS99
09-26-2011, 03:29 PM
That looks incredible. Great job

Thank you.....:cheer:

Tweaks
09-26-2011, 03:45 PM
Are those faux valve covers to hide the coils? Those actually look great and clean things up.

MADS99
09-26-2011, 06:46 PM
Are those faux valve covers to hide the coils? Those actually look great and clean things up.

Thank you.......Ya they are Called, Billet Ignition Coil Cover's, their from Street & Performance Electronics and I just painted the Milled lines Gloss Black.

Chin Strap
09-26-2011, 07:27 PM
Nice job polishing the alternator.

MADS99
09-26-2011, 08:28 PM
Nice job polishing the alternator.

Thanks but I can't take all the credit......on Polishing the Alternator as it is Triple Chrome Plated.

Twostrokeking
09-26-2011, 08:48 PM
dude. how did u do that. haha any tips

MADS99
09-27-2011, 09:34 AM
dude. how did u do that. haha any tips

Sorry, not sure what your asking about with...(how did I do That??).....and as far as any tips, I used a lot of elbow grease and $$$...lol.

CustomChevyGuy
09-27-2011, 02:10 PM
cleanest dressed up bay i've ever seen on the nbs truck! good job

MADS99
09-27-2011, 04:08 PM
cleanest dressed up bay i've ever seen on the nbs truck! good job

Thank you.....:cheer:

Twostrokeking
09-27-2011, 08:55 PM
how did u get it like that?! man give me advice haha i lose patience. here is mine. http://i937.photobucket.com/albums/ad220/pencilshredder22/106_0037.jpg

MADS99
09-28-2011, 03:01 PM
how did u get it like that?! man give me advice haha i lose patience. here is mine. http://i937.photobucket.com/albums/ad220/pencilshredder22/106_0037.jpg

Looking at the the picture of your Engine Bay and the pictures of your Truck in your Sig, you have One Sharp Looking Ride, Very Nice and your Engine Bay is Very Clean Looking!!......

Below is a Appearance Chrome Package kit......for your Truck, which is 1 route you could go......I would just mention maybe Changing the Blue Wire Loom Casing to Black ones and pickup some Stain Black Paint(Rattle can) and hit the Hood Latch Receiver......I like Black Stain Paint in the engine bay, it gives off a Cleaner/Factory look than does Gloss black other than that you've done a Great Job.....16 yr Old Truck that Looks Great!!.....you've done a Awesome Job.

http://www.stylintrucks.com/parts/super_sunny_engine_dress_up_kit_chrome_engine_acce ssories/Super+Sunny317.aspx

For Detailing the Black Plastic parts and Hoses I use.....303 Aerospace Protectant and along with Towels, I use a couple of small paint brushes.....1/2in' and 1in' wide to get into those tight spots.

http://www.303products.com/shop303/index.cfm/category/1/303-aerospace-protectant.cfm
[/FONT]

WildChevys
09-28-2011, 04:28 PM
wow

Twostrokeking
09-28-2011, 06:58 PM
Looking at the the picture of your Engine Bay and the pictures of your Truck in your Sig, you have One Sharp Looking Ride, Very Nice and your Engine Bay is Very Clean Looking!!......

Below is a Appearance Chrome Package kit......for your Truck, which is 1 route you could go......I would just mention maybe Changing the Blue Wire Loom Casing to Black ones and pickup some Stain Black Paint(Rattle can) and hit the Hood Latch Receiver......I like Black Stain Paint in the engine bay, it gives off a Cleaner/Factory look than does Gloss black other than that you've done a Great Job.....16 yr Old Truck that Looks Great!!.....you've done a Awesome Job.

http://www.stylintrucks.com/parts/super_sunny_engine_dress_up_kit_chrome_engine_acce ssories/Super+Sunny317.aspx

For Detailing the Black Plastic parts and Hoses I use.....303 Aerospace Protectant and along with Towels, I use a couple of small paint brushes.....1/2in' and 1in' wide to get into those tight spots.

http://www.303products.com/shop303/index.cfm/category/1/303-aerospace-protectant.cfm
[/FONT]

thanks alot man (: haha the truck is about as old as i am. im 15. i bought the truck with my own money. i dont want people to think im a spoiled rich kid because i saved for a truck since i was 3. this truck is my everything

MADS99
09-29-2011, 09:28 AM
wow

Thanks.....:cheer:




thanks alot man (: haha the truck is about as old as i am. im 15. i bought the truck with my own money. i dont want people to think im a spoiled rich kid because i saved for a truck since i was 3. this truck is my everything

Well its a Very Nice Truck!!.....you've done a Great Job, in making it your own.

jakeenbake
10-05-2011, 11:41 PM
You would die if I showed you the engine bay of my truck... The whole thing caked in dry mud. I've been cleaning it for weeks

theroofable
10-09-2011, 03:39 PM
That alternator looks amazing