Ironroad9c1
12-26-2011, 01:53 PM
I picked up this 96 off craigslist for a song, guy bought it with a blown up engine and he bought one for it and hired two different guys to install it, well neither one was a real mechanic so It didn't get far, Dropping it in the bay was about it.
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0870.jpg
but it was a pretty clean truck and had real low miles, had been sitting since 08, it belonged to a pavement sealing and marking company before the guy I got it from and it has rock dust and silt in ever orifice, so i brought it home and pulled the engine back out cause I didn't trust anything the other two guys did , good thing too because the timing cover had a hole busted in it behind the waterpump. Cleaned it up and did some painting .
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0898.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0905.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0904.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0879.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0880.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0895.jpg
installed a new timing chain, new cover and replaced the oil pan gasket while I had it all apart.
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0876.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0882-1.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0887.jpg
also took a spare intake and cleaned it really good, and installed a new MPFI spider in place of the poppets and installed it with
the newer style metal framed intake gaskets.
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0878.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0881.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0870.jpg
but it was a pretty clean truck and had real low miles, had been sitting since 08, it belonged to a pavement sealing and marking company before the guy I got it from and it has rock dust and silt in ever orifice, so i brought it home and pulled the engine back out cause I didn't trust anything the other two guys did , good thing too because the timing cover had a hole busted in it behind the waterpump. Cleaned it up and did some painting .
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0898.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0905.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0904.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0879.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0880.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0895.jpg
installed a new timing chain, new cover and replaced the oil pan gasket while I had it all apart.
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0876.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0882-1.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0887.jpg
also took a spare intake and cleaned it really good, and installed a new MPFI spider in place of the poppets and installed it with
the newer style metal framed intake gaskets.
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0878.jpg
http://img.photobucket.com/albums/v189/ironroad9c1/1996 K2500/IMG_0881.jpg