XXL
01-04-2012, 07:15 PM
SOLD
Both upper and lower control arms by ART, for 63-87 C-10. These were from their very first production run @4 years ago, but have less than 1500 miles on them. Original run had the LCA shock mount on the wrong side (the bottom side), so they have been moved to the top side as in their subsequent design. Bag plate area has hole drilled for both stock crossmember (hole the arm came with) and Porterbuilt-preferred location (about an inch outboard of original mounting hole). Arms are solid, though a bit dirty and grimy (no extra charge!). One side has scraped the ground some (see pics), but it is functionally rock solid. Because of the very low miles on them, the ball joints are in excellent condition. Parts could use a little elbow grease and some Krylon to make them pretty for your hooptie. A new set will cost you $1000 + shipping. Buy mine and save $$$$$.
$675/set includes FREE shipping
(1 set available)
I can do Paypal or check/mo by mail. If you want to know who you're dealing with, I'm "labboypro" on ebay and heatware, with 13+ years of positive fb.
Please PM if interested
http://myattitudesucks.com/fark/artarms01.jpg
http://myattitudesucks.com/fark/artarms02.jpg
http://myattitudesucks.com/fark/artarms03.jpg
http://myattitudesucks.com/fark/artarms04.jpg
http://myattitudesucks.com/fark/artarms05.jpg
Both upper and lower control arms by ART, for 63-87 C-10. These were from their very first production run @4 years ago, but have less than 1500 miles on them. Original run had the LCA shock mount on the wrong side (the bottom side), so they have been moved to the top side as in their subsequent design. Bag plate area has hole drilled for both stock crossmember (hole the arm came with) and Porterbuilt-preferred location (about an inch outboard of original mounting hole). Arms are solid, though a bit dirty and grimy (no extra charge!). One side has scraped the ground some (see pics), but it is functionally rock solid. Because of the very low miles on them, the ball joints are in excellent condition. Parts could use a little elbow grease and some Krylon to make them pretty for your hooptie. A new set will cost you $1000 + shipping. Buy mine and save $$$$$.
$675/set includes FREE shipping
(1 set available)
I can do Paypal or check/mo by mail. If you want to know who you're dealing with, I'm "labboypro" on ebay and heatware, with 13+ years of positive fb.
Please PM if interested
http://myattitudesucks.com/fark/artarms01.jpg
http://myattitudesucks.com/fark/artarms02.jpg
http://myattitudesucks.com/fark/artarms03.jpg
http://myattitudesucks.com/fark/artarms04.jpg
http://myattitudesucks.com/fark/artarms05.jpg