2" RC Kit + 4" RC spindels

[Ol'Rover]

Can the RC 2" Lift kit (Ball joint spacers + Coils) be used with the RC 4" Spindel kit?

Just wondering looking into possibly lifting my 2wd.

[tahoe 9955]

yes

[Ol'Rover]

thats the answer i was looking for! thanks!

[Stroked385]

That's what I'm going with. When you do it post pics, I'm curiouse how it will sit.

[camarofanatic90]

i have both the spindle kit and the coil springs with ball joint spacers what do i need to bring the back up to match?

[tahoe 9955]

i have both the spindle kit and the coil springs with ball joint spacers what do i need to bring the back up to match? what have you done to the rear so far

[camarofanatic90]

Nothing yet just have the parts for the front and the 2" blocks for rear that came with spindles I don't have any of it installed yet

[tahoe 9955]

Nothing yet just have the parts for the front and the 2" blocks for rear that came with spindles I don't have any of it installed yet

if you want it level, with no rake , I would go with the 2" block and a 2" add-a-leaf in the rear. On e-bay they sell rough country for $55 and pay freight. Make sure you get the long one as the short one will give you a pretty harsh ride.

[camarofanatic90]

Thanks for the help I will look into that

[camarofanatic90]

i have another question when i put the spindles on and the springs in will my stock brake lines work or will i need longer ones?

[tahoe 9955]

on the rear you can unbolt the bracket from the differential and bend the metal lines up and on the front you can disconnect where they go thru the frame and relocate below it by also bending the metal lines but imo I would get new lines anytime you go over 4" the front is $100 and the rear is $50 from fourwheelpartswholesale and make sure you bleed them whichever route you choose