Iowa599
02-24-2012, 09:49 PM
It's a good work truck. I, a professional mechanic, just went through the engine and front end. All fluids and filters changed, no leaks, runs great, working A/C.
The specs:
-305/5.0 V8 engine, fuel injected (TBI)
-Automatic transmission (with over drive)
-207,??? miles
-ABS (anti-lock brakes)
-Good interior, seats & carpet out of a newer truck
-Has a 2" receiver hitch
-Drop in bed liner with aluminum rail caps
-Also installed an electric radiator fan, short headers, and brand new exhaust, VERY quiet, quieter than stock, just did it for the MPG. 20+ highway
Maintenance done:
-new valve cover gaskets & emissions hoses
-changed coolant & thermostat
-flushed brake fluid, clean/lubed/adjusted front & rear brakes & front wheel bearings
-changed engine oil/filter and cooler hoses
-flushed power steering fluid, replaced hoses
-flushed transmission, replaced filter & gasket
-changed rear axle lube, resealed cover
-replaced sway bar bushings & end links
-replaced pitman & idler arm, adjusted steering gear box (drives like a car now)
-performed alignment, everything in specs, straight, and ready to work
-new engine and transmission mounts
http://i222.photobucket.com/albums/dd150/xci_ed6/C1500/truck3.jpg
http://i222.photobucket.com/albums/dd150/xci_ed6/C1500/truck1.jpg
http://i222.photobucket.com/albums/dd150/xci_ed6/C1500/engine2.jpg
http://i222.photobucket.com/albums/dd150/xci_ed6/C1500/mailgooglecom.jpg
http://i222.photobucket.com/albums/dd150/xci_ed6/C1500/side.jpg
It's not really that tall, it is slightly lifted by the hoist. The repairs and maintenance were all done in a professional setting by me. I did not repair the truck to sell, I intended to keep it. I have all the receipts and the work was all done correctly, with quality parts.
$1800/offer. Located in Bradenton, FL. I am open to trades for motorcycles/scooters (2 wheels only, no Chinese junk), nitrous oxide kit (NOS, ZEX, etc...), and also hobby size machine tools such as a mill, (metal working) lathe, 3-in-1 machine. Tell me what you've got! This would be a great truck for anyone who needs to haul things on a budget.
The specs:
-305/5.0 V8 engine, fuel injected (TBI)
-Automatic transmission (with over drive)
-207,??? miles
-ABS (anti-lock brakes)
-Good interior, seats & carpet out of a newer truck
-Has a 2" receiver hitch
-Drop in bed liner with aluminum rail caps
-Also installed an electric radiator fan, short headers, and brand new exhaust, VERY quiet, quieter than stock, just did it for the MPG. 20+ highway
Maintenance done:
-new valve cover gaskets & emissions hoses
-changed coolant & thermostat
-flushed brake fluid, clean/lubed/adjusted front & rear brakes & front wheel bearings
-changed engine oil/filter and cooler hoses
-flushed power steering fluid, replaced hoses
-flushed transmission, replaced filter & gasket
-changed rear axle lube, resealed cover
-replaced sway bar bushings & end links
-replaced pitman & idler arm, adjusted steering gear box (drives like a car now)
-performed alignment, everything in specs, straight, and ready to work
-new engine and transmission mounts
http://i222.photobucket.com/albums/dd150/xci_ed6/C1500/truck3.jpg
http://i222.photobucket.com/albums/dd150/xci_ed6/C1500/truck1.jpg
http://i222.photobucket.com/albums/dd150/xci_ed6/C1500/engine2.jpg
http://i222.photobucket.com/albums/dd150/xci_ed6/C1500/mailgooglecom.jpg
http://i222.photobucket.com/albums/dd150/xci_ed6/C1500/side.jpg
It's not really that tall, it is slightly lifted by the hoist. The repairs and maintenance were all done in a professional setting by me. I did not repair the truck to sell, I intended to keep it. I have all the receipts and the work was all done correctly, with quality parts.
$1800/offer. Located in Bradenton, FL. I am open to trades for motorcycles/scooters (2 wheels only, no Chinese junk), nitrous oxide kit (NOS, ZEX, etc...), and also hobby size machine tools such as a mill, (metal working) lathe, 3-in-1 machine. Tell me what you've got! This would be a great truck for anyone who needs to haul things on a budget.