Wide Band reads 10.1

[pima.1971]

Need some help. My wide band reads 10.0 - 10.1 while the voltage going to pin b16 is 2.4volts. The stand alone gauge reads 2.4v at 14.7, 2.37 @ 14.6, 14.5@2.33 does this sound right? But Tunerprort reads 10 - 10.1 afr. Something is not right. I used the adx from tunerpro site. Any ideas?

94 5.7 z71
7427 ecm

[1.721afr]

Need some help. My wide band reads 10.0 - 10.1 while the voltage going to pin b16 is 2.4volts. The stand alone gauge reads 2.4v at 14.7, 2.37 @ 14.6, 14.5@2.33 does this sound right? But Tunerprort reads 10 - 10.1 afr. Something is not right. I used the adx from tunerpro site. Any ideas?

94 5.7 z71
7427 ecm

You will have to jump into the bin to see if the calculations are correct for your sensor.

If that checks out then the ADX would be my next suspect.

[pima.1971]

Triple checked wiring. Wrong pin. I thought it was b16, turns out when I flipped the connector over I didn't follow it, I went to pin B1. Oops. Got it straightened out and it works right.