groundedsst
04-04-2012, 08:29 PM
I just threw a set of 22s on the front of my 98 1500 and I am looking for a little extra fender clearance with my setup. I am on a 255/30/22 and wheels are 22x9.5 +13. Rear tucks but because of the panhard bar I get a little side to side movement that causes rubbing when flat out. I am remedying this with a watts that im building already. Up front I am on de-humped stock arms and spindles. I am noticing more toe out when I am laying the front out. I also notice that the camber is very minimal. My thoughts were that I could get the front end aligned and have them add a little camber to kick the tires in. The other thought is that there is some sort of arm and/or spindle combo that gives me a little more clearance.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/p480x480/548651_752249045047_32600168_35539674_546665836_n. jpghttps://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/536399_752248685767_32600168_35539672_284230368_n. jpg
...and the front isn't laid fully yet. I still need to trim whats left of the inner fenders.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/p480x480/548651_752249045047_32600168_35539674_546665836_n. jpghttps://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/536399_752248685767_32600168_35539672_284230368_n. jpg
...and the front isn't laid fully yet. I still need to trim whats left of the inner fenders.