View Full Version : Grill removal from 2000 Suburban
04-08-2012, 07:26 AM
Before it's suggested that I use the search function let me say that I just spent the last hour doing that. Didn't find much help.
I need to remove my grill shell so I can install a new horn and a new T-Rex billet grill. I'm replacing the bumper lights and headlights at the same time. I have no idea how to remove the grill so I can get started. Any help would be appreciated.
pop the hood take the one 10mm bolt out from the top of the shell close to the hood latch. then twist the 4 phillips head locks on the on the inside of each light. the bottom locks are kinda hidden under the shell. then one each end are to pop tabs a little persuasion will take care of
04-10-2012, 04:05 PM
Thanks for the assist. The grill swap was a piece of cake. Got the new grill, bumper lights, X2020 headlights, and the 4-Hi relay installed. Only problem was the low beam on the passenger side didn't work. Did some trouble shooting and found that they had shipped to me without the HID capsule installed. Color me pissed off! Got on the horn with the distributor and he lit a fire at Sylvannia. New capsule is being overnighted to me. At least i got a new windshield washer motor installed while I was waiting. Turned out the hardest part of the whole project was dropping the reservoir and re-installing it.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO