View Full Version : Where are the clutch hydraulics mounted??
04-10-2012, 10:57 AM
I am about to convert my 85 k10 truck back to 4-speed manual, however i am not sure exactly where my reservoir and clutch master cylinder mount, i could get it all mounted it just might not be right, just some pictures would help
04-10-2012, 03:12 PM
If you look below the wiper motor and slightly to the drivers side you should see the three holes used to mount the master cylinder. Make sure you still have both support rods going from the pedal bracket to the firewall.the brackets have studs on the end of them that will protrude. through the firewall and are used to mount the master cylinder. The reservoir used a bracket that bolts into the bolts used to mount the wiper motor
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO