GMT 400 OBS Hedman Hustler headers 4x4 long tubes

[BowtieWarrior]

I am selling my Long tubes. less than 3000 miles on them and they are in great shape. the thermal coating has changed from the nice shiny color it was when new to a more pale color.

http://www.summitracing.com/parts/HED-65861-6/

that is the summit page with the specs on my headers.

I paid almost 800 for them new. I guess $400.00 should be fair? make me an offer

My thoughts on these headers:
They are extremely nice, and them make awesome power.
Trust me when I say they fit awesome in a 4x4 chassis, they will fit a 2WD chassis but its tight.
They are non-emission headers there is no prevision for EGR.
http://carphotos3.cardomain.com/images/0015/58/95/15708559_large.jpg?v=1
http://carphotos4.cardomain.com/images/0015/58/16/15708561_medium.jpg?v=1
http://carphotos.cardomain.com/images/0015/58/85/15708558_medium.jpg?v=1
http://carphotos3.cardomain.com/images/0015/58/75/15708557_medium.jpg?v=1

I also have,
Flowmaster 40 series dual 2.5" in and dual 2.5" outlet ($40)
(2) 2.5" race ready cut outs with wing nut bolt on plate ($40)


Thanks,
Bowtie

[loudandproud]

will these fit with a 5 speed manual?

Where do the headers come down past the firewall on the passenger side?

[BowtieWarrior]

will these fit with a 5 speed manual?

Where do the headers come down past the firewall on the passenger side?

I don't see why they wouldn't work on a 5-speed truck.

They drop relatively far from the block on both sides, on the passenger side there is plenty of room to run a factory starter. no need to run a mini starter.

Let me know if you have any more questions.
thanks,
Joe

[loudandproud]

I don't see why they wouldn't work on a 5-speed truck.

They drop relatively far from the block on both sides, on the passenger side there is plenty of room to run a factory starter. no need to run a mini starter.

Let me know if you have any more questions.
thanks,
Joe

Does it run over, beside, or under the starter? Have any installed pics?

[BowtieWarrior]

Does it run over, beside, or under the starter? Have any installed pics?
they run besides the starter on the same level as the transmission. (auto)

here are the best ive got.

[BowtieWarrior]

http://carphotos4.cardomain.com/images/0015/81/80/15771808_large.jpg
http://carphotos4.cardomain.com/images/0015/81/60/15771806_large.jpg
http://carphotos.cardomain.com/images/0015/81/70/15771807_large.jpg
http://carphotos2.cardomain.com/images/0015/81/50/15771805_large.jpg

[loudandproud]

Doesnt look like that will work... dang...

These 5LM60's have big boss that hangs off the right side for the slave cylinder that ends up right where the collector would be.

[BowtieWarrior]

Doesnt look like that will work... dang...

These 5LM60's have big boss that hangs off the right side for the slave cylinder that ends up right where the collector would be.

seriously? according to summit they are suppose to work with the 5 speed trucks as well. If you have the time you could always call hedman and ask them.

[loudandproud]

I will call hedman tomorrow...