Darkside919
04-17-2012, 01:46 PM
I have a 2000 Silverado ECSB. I pulled the knee bolster under the steering column and this is what you will see.
http://img577.imageshack.us/img577/5350/001pyo.jpg
I then pulled the BCM ( I think that is what it is called) and disconnected the 3 plugs and lift the tab on top and it will slide out towards you.
http://img7.imageshack.us/img7/8738/002vpn.jpg
There are 4 tabs that hold the box around the circuit board 2 on each side.
http://img404.imageshack.us/img404/2176/003rsw.jpg
http://img542.imageshack.us/img542/5268/004ou.jpg
Towards the back of the board you will see the 1" diameter buzzer. I have already removed mine but this is where it was.
http://img845.imageshack.us/img845/6473/006gt.jpg
http://img809.imageshack.us/img809/236/007tv.jpg
Turn the board over and unsolder the buzzer then remove it. Reassemble everything and no more buzzer and nothing else is affected. I have no clue if this will work on other year models but for my 2000 it worked like a charm. I will try and get some pics up in the next day or so. Just thought I would pass on the info for anyone looking.
http://img577.imageshack.us/img577/5350/001pyo.jpg
I then pulled the BCM ( I think that is what it is called) and disconnected the 3 plugs and lift the tab on top and it will slide out towards you.
http://img7.imageshack.us/img7/8738/002vpn.jpg
There are 4 tabs that hold the box around the circuit board 2 on each side.
http://img404.imageshack.us/img404/2176/003rsw.jpg
http://img542.imageshack.us/img542/5268/004ou.jpg
Towards the back of the board you will see the 1" diameter buzzer. I have already removed mine but this is where it was.
http://img845.imageshack.us/img845/6473/006gt.jpg
http://img809.imageshack.us/img809/236/007tv.jpg
Turn the board over and unsolder the buzzer then remove it. Reassemble everything and no more buzzer and nothing else is affected. I have no clue if this will work on other year models but for my 2000 it worked like a charm. I will try and get some pics up in the next day or so. Just thought I would pass on the info for anyone looking.