mineralgrey01gt
05-10-2012, 01:40 PM
Im putting my bagged 84 c10 single cab short wheel base up for sale. I just do not use it anymore and it just needs to be driven and used by someone who will appreciate the work and such put into it so far. I slowly lost interest in it and just want it gone but will not give it away. It does drive just fine and never left me stranded or anything. Everything works as it should. Only things left to make it street legal is install the horn and horn button and a windshield wiper motor and windshield wiper arms and blades. I have everything for the horn set up just not installed and the windshield wiper motor is around $50 from any parts place. The mileage is actually unkown on the truck itself but the motor has around 4,000 miles on it and the transmission I was told has about the same. It has one leak where the speed sensor goes into the transmission. Its just the gasket which is minor. The speed sensor isnt hooked up but wires are ran just not hooked up at the moment. Here is the parts list that I can think of off the top of my head:
1984 chevrolet c10
extremely straight body, little to no rust. It honestly is extremely good, i was shocked when I got it.
all shaved but the door handles
all primer with gloss black doors. It needs a paint job but it does turn heads as is.
MOTOR:
350 sbc
289 cam
holley rockers
450cfm carb (not sure on brand at the moment)
eldebrock intake
front serpentine pulley set up off a corvette
brand new radiator with electric fan
10 gallon fuel cell in bed
more that im probably forgetting, heres an idle vid:
http://i673.photobucket.com/albums/vv91/lilzilla2008/th_ed1c7962.jpg (http://s673.photobucket.com/albums/vv91/lilzilla2008/?action=view¤t=ed1c7962.mp4)
only engine pic i have:
http://i673.photobucket.com/albums/vv91/lilzilla2008/005.jpg
EXHAUST:
Hooker shorty headers
2.5" from headers to true dual flowmaster 40 series mufflers
SUSPENSION:
just front and back, no side to side
firestone bags at all 4 corners
SMC fast valves
Viair 380 compressor
5 gallon polished tank in bed (still has original tank that came with it under bed, it can be fixed i just replaced it when it started leaking)
3/8" lines
7 button air controller
frame is z'd in the front and big notch in rear
INTERIOR:
flat black custom rolled sheetmetal dash (looks killer in the truck) with red leather top
custom wood center console that holds gauges and air switch controller
original bench seat and has most of the interior minus carpet and a few other pieces
all autometer gauges with red LED's in them
2 KP components gauges for the air ride, 1 pressure for tank and other gauge is for the pressure in the bags
kicker ks525 speakers in each door, no head unit in it right now but all wire is ran for an amp set up
budnik billet wheel wrapped in red leather
http://i673.photobucket.com/albums/vv91/lilzilla2008/ff59a817.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/30d1ec06.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/b84b396d.jpg
before the console:
http://i673.photobucket.com/albums/vv91/lilzilla2008/362ae412.jpg
WHEELS:
BRAND NEW gray boss 338's with 3 new tires and one still good tire. Tire size is 255/35/20's. This set up maybe has 50 miles on it since I put them on which was a few months ago
http://i673.photobucket.com/albums/vv91/lilzilla2008/7b99ea31.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/90754db2.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/9433f7ee.jpg
Also I have some different things laying around for it such as a new set of taillight lenses, plug wires, distributor cap, few interior pieces, etc
Im looking to get $5000 for it. I do not have to get rid of it but id like to. If you or anyone you know is interested please email me at lilzilla2008@yahoo.com and we can go from there. If you have any more questions please ask me. Thanks.
http://i673.photobucket.com/albums/vv91/lilzilla2008/8d25a6ee.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/053e8dde.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/ccd4545d.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/b9353277.jpg
with the old wheels:
http://i673.photobucket.com/albums/vv91/lilzilla2008/19950463.jpg
1984 chevrolet c10
extremely straight body, little to no rust. It honestly is extremely good, i was shocked when I got it.
all shaved but the door handles
all primer with gloss black doors. It needs a paint job but it does turn heads as is.
MOTOR:
350 sbc
289 cam
holley rockers
450cfm carb (not sure on brand at the moment)
eldebrock intake
front serpentine pulley set up off a corvette
brand new radiator with electric fan
10 gallon fuel cell in bed
more that im probably forgetting, heres an idle vid:
http://i673.photobucket.com/albums/vv91/lilzilla2008/th_ed1c7962.jpg (http://s673.photobucket.com/albums/vv91/lilzilla2008/?action=view¤t=ed1c7962.mp4)
only engine pic i have:
http://i673.photobucket.com/albums/vv91/lilzilla2008/005.jpg
EXHAUST:
Hooker shorty headers
2.5" from headers to true dual flowmaster 40 series mufflers
SUSPENSION:
just front and back, no side to side
firestone bags at all 4 corners
SMC fast valves
Viair 380 compressor
5 gallon polished tank in bed (still has original tank that came with it under bed, it can be fixed i just replaced it when it started leaking)
3/8" lines
7 button air controller
frame is z'd in the front and big notch in rear
INTERIOR:
flat black custom rolled sheetmetal dash (looks killer in the truck) with red leather top
custom wood center console that holds gauges and air switch controller
original bench seat and has most of the interior minus carpet and a few other pieces
all autometer gauges with red LED's in them
2 KP components gauges for the air ride, 1 pressure for tank and other gauge is for the pressure in the bags
kicker ks525 speakers in each door, no head unit in it right now but all wire is ran for an amp set up
budnik billet wheel wrapped in red leather
http://i673.photobucket.com/albums/vv91/lilzilla2008/ff59a817.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/30d1ec06.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/b84b396d.jpg
before the console:
http://i673.photobucket.com/albums/vv91/lilzilla2008/362ae412.jpg
WHEELS:
BRAND NEW gray boss 338's with 3 new tires and one still good tire. Tire size is 255/35/20's. This set up maybe has 50 miles on it since I put them on which was a few months ago
http://i673.photobucket.com/albums/vv91/lilzilla2008/7b99ea31.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/90754db2.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/9433f7ee.jpg
Also I have some different things laying around for it such as a new set of taillight lenses, plug wires, distributor cap, few interior pieces, etc
Im looking to get $5000 for it. I do not have to get rid of it but id like to. If you or anyone you know is interested please email me at lilzilla2008@yahoo.com and we can go from there. If you have any more questions please ask me. Thanks.
http://i673.photobucket.com/albums/vv91/lilzilla2008/8d25a6ee.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/053e8dde.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/ccd4545d.jpg
http://i673.photobucket.com/albums/vv91/lilzilla2008/b9353277.jpg
with the old wheels:
http://i673.photobucket.com/albums/vv91/lilzilla2008/19950463.jpg