View Full Version : 1995 k1500 gauge lighting
05-25-2012, 09:36 PM
Wanted to replace the bulbs in my instument gauge and put in leds. Does anyone know exactly which leds it takes to make this conversion, and the process to do it?
06-04-2012, 08:09 AM
6 194s and twistlocks as 95s are still soldered into the factory ones. Pullthe cluster twist out the twistlock install new one
06-04-2012, 08:37 AM
Thanks, took out the cluster and popped 1 of the 194's out of the twist lock holders. A little tuff to pull out but it came out. Stuck a 194 in there and worked fine. It did say replace the thing bit the bulb came out. The bulb holder wasn't the square type holder.
06-10-2012, 09:07 PM
If u want to save some money on the twist lock 194 bulb holder, in the gauge cluster, take a little flat screw driver and break the 194 wires that are soldered to the twist lock holder break out the bulb and take your new led "194" and unbend the wires on it put it in the holder then finish with bending the wires tight against the contacts. Twist back into cluster and ban your done . Now only 5 more to do! Takes patients.
06-12-2012, 06:17 AM
:lol: Ive got junkyards and pockets for twistlocks :lol:
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
SEO by vBSEO