Led replacement in cluster?

[Chevy53]

Are the bulbs in our cluster remove able? And do we have to solder in LEDs? Or
Can I just switch out the bulbs like in some other cars


-Ziggy-

[Quinton23]

Ive been wanting to do this for awile. Im pretty sure you can just replace the bulbs.

[Chevy53]

I'm not sure that's why I'm asking If it's just bulbs then it's really easy


-Ziggy-

[Dev's93]

if its the 02 in your sig yes they are plug in play you will need 6 bulbs and twistlocks

[Dev's93]

http://img.tapatalk.com/aefd1098-a778-001e.jpg
Ive gotta,pic of one in blue too but its not wanting to post for some reason

From your phone............

[Chevy53]

if its the 02 in your sig yes they are plug in play you will need 6 bulbs and twistlocks

Sweet where do I get twist locks?


-Ziggy-

[Dev's93]

junkyard sbl or autozone ,advanced etc but they are kinda expensive there

[Chevy53]

I work part time at a parts store so I'll check there today see how it goes


-Ziggy-

[Chriscon7]

I work part time at a parts store so I'll check there today see how it goes


-Ziggy-

let us know how it goes, kinda curious

[onahulvey]

You would need to feed the wires through the mirror connection to the door and through the door into the door jamb and through the fender to the turn signal and slice into the wires there. Repeat for the other side.

[Dev's93]

what?? there is no need to pull any wire just replace the factory bulbs with leds

[silverado_lover]

what?? there is no need to pull any wire just replace the factory bulbs with leds

I thought your LED's came with the twistlocks?

[Dev's93]

I sell twistlocks when i have them in stock. I tried some sbl ones but was having problems with the contacts. My supplier dont sell twistlocks so Ive been trying a few other places.. Plus you dont need new twistlocks if the bulbs arent soldered in. what ive figured out so far is 95 down is soldered 96/99 obs arent soldered. Then They started soldering the again on the nbs. then in 03 they did away with twistlocks period and solder them into a board in the clusters. Also 02 Trailblazers has them soldered to the cluster board as well. Im now working on getting into some old school stuff like gbodies etc. Ive also just brought in a lot more stuff 1157 , 1156 , 3157, 3156 etc the part that sucks on the 3156/3157 is they wont work on obs's

[skaffy03]

Superbrightleds.com


---
I am here: http://tapatalk.com/map.php?nsfcx4