97 FIREBIRD TRANS AM Seats

[TBRays98]

will the seats and console fit in my 95 reg cab?
Its grey leather no rips or anything and im getting both seats and console for $100

[TBRays98]

Well if no one answers soon ill let all of you know since im buying them regardless and i will make them fit somehow

[HawgEnvy]

Lol. Let us know. Anything can be made to work. Good luck n don't forget the pics and write up.

[TBRays98]

haha i wont i dont give up very easily and forget the console i found a good one out of a suburban
Ill do the write up as well which would also work for corvettes and camaros

[robotic_junky]

Someone else has done it.


Same seats I've got in my truck, I just took the stock bench risers (got a second set from a picknpull) and used them to mount the seats. It sits a little higher on the drivers side since it's a 6 way power seat but not bad, might cut it down and weld it back up eventually but it works fine. Only pic I can find is below and the switches are mounted to a piece of plywood that I've covered in black suede now.

http://i585.photobucket.com/albums/ss299/rock-usaf/DSC00425.jpg

[rockusaf]

Someone else has done it.

HAHA that looks familiar. I just mounted the seats to 2 sets of bench seat risers without the brace connecting them in the front and drilled the 2 inside bolt holes on each side. I used some 1/4" (I think) grade 8 bolts I picked up to mount the seats to the risers and everything bolted right up. Center console is out of a late 90's suburban and I built up a brace in the front to rise it up about 2 inches.

[TBRays98]

thanks for the help ill post pics when im all done

[TBRays98]

alright i got the firebird seats for ten dollars and the truck bucket brackets and they lined up perfect
but the seats are so torn up im just gonna re sell them
i bought some suburban seats today and will be putting those in instead
well once i can find a powered seat harness.....