MotoHeadKX
05-25-2003, 08:37 PM
Ok. Im not an expert on car audio so I need some help. Im looking into buying two Sony 10" Xplod XS-L101P5 subwoofers and a Sony Amp (not sure which one) to power them. I want to know if the Sony Xplod 1000 watt 2-Channel Amp will do the job. Im not a hard core bass person, just want something better than the weak stock speakers. Also, are the Sony subwoofers and amp a good brand choice? Please let me know if this setup will work. Here are the specs of each:
http://images.bestbuy.com/images/esku/detail/11202868frC.jpg
--Capable of handling 1,100 watts peak, 300 watts RMS (continuous)
--10" compound-polypropylene cone with advanced P5 Series pentagonal cone geometry for dramatically reduced standing-wave production and exceptional rigidity
--Optimized for use in small, sealed enclosures
--Gold-plated binding posts for superior signal integrity
--Frequency response: 18Hz - 2.5kHz
--Sensitivity: 88dB
--Impedance: 4 ohms
http://images.bestbuy.com/images/esku/detail/11209541frC.jpg
--780W peak, 380W RMS (continuous) x 1 @ 4 ohms, bridged
--165 watts RMS x 2 @ 4 ohms
--Stereo or bridged-mono output; tri-way capable
--MOSFET (Metal Oxide Semiconductor Field Effect Transistor) power supply and output devices for clean, steady power
--50-300Hz variable crossover for use in subwoofer applications
--Selectable 10dB bass boost centered at 40Hz
--Preamp and speaker-level inputs
--Gold-plated connectors
MotoHeadKX
http://images.bestbuy.com/images/esku/detail/11202868frC.jpg
--Capable of handling 1,100 watts peak, 300 watts RMS (continuous)
--10" compound-polypropylene cone with advanced P5 Series pentagonal cone geometry for dramatically reduced standing-wave production and exceptional rigidity
--Optimized for use in small, sealed enclosures
--Gold-plated binding posts for superior signal integrity
--Frequency response: 18Hz - 2.5kHz
--Sensitivity: 88dB
--Impedance: 4 ohms
http://images.bestbuy.com/images/esku/detail/11209541frC.jpg
--780W peak, 380W RMS (continuous) x 1 @ 4 ohms, bridged
--165 watts RMS x 2 @ 4 ohms
--Stereo or bridged-mono output; tri-way capable
--MOSFET (Metal Oxide Semiconductor Field Effect Transistor) power supply and output devices for clean, steady power
--50-300Hz variable crossover for use in subwoofer applications
--Selectable 10dB bass boost centered at 40Hz
--Preamp and speaker-level inputs
--Gold-plated connectors
MotoHeadKX