Backspacing Question time...

[Loki]

Want to know if i can tuck a 22" x 9.5" in the back of a NBS with 5.75 BSM and an offset of +14mm.

Also want to know if i can tuck a 20" x 8.5" in the front of a NBS with 5.24 BSM and an offset of +14mm.

I'll get the tires to tuck no problem, just need the rims to first...

Thanks BS wizards :D

Jack

[mood_indigo]

with the right tire up front, you won't have any problems. i don't know if you remember what it looks like, but that is the same offset james has on his truck. jimmy also has that on his white NBS.

i'm not too sure about out back. i'll do some number crunching and get back to you.:D

[mood_indigo]

imo, the rear wheel in not going to work.... unless you do some serious fender work. let's say you run a 265/35/22 on that wheel, the distance from the mounting surface to outer most edge (total front spacing) of the wheel/tire combo is 5.25 inches. in other words, you would need to have about 5.5 inches of clearance between the hub and inner fender lip. :(

[Loki]

i'm planning on tubbing the fenders so it doesn't really matter what the bed looks like....just as long as they can get past the lip on the outside i'll be fine...

[mood_indigo]

Originally posted by Loki
i'm planning on tubbing the fenders so it doesn't really matter what the bed looks like....just as long as they can get past the lip on the outside i'll be fine...


that's the lip you're gonna have trouble with:read:

[Outlawcrewcab]

MOOD did you get your box togther? i want to hear it. Also the sub that i was was trying to remeber that my dad has it a Xtant sub and amp

[mood_indigo]

Originally posted by outlawcrewcab
MOOD did you get your box togther? i want to hear it. Also the sub that i was was trying to remeber that my dad has it a Xtant sub and amp


not yet, i'm still piecing everything together. this house is costing me a lot more in extras than i anticipated:(


i've heard a lot of good stuff about xtant amps. i'm actually considering using 'em to push my stereo:D

[DemoN]

Originally posted by outlawcrewcab
MOOD did you get your box togther? i want to hear it. Also the sub that i was was trying to remeber that my dad has it a Xtant sub and amp

hey, you still got that grill shell? Can a brotha still get a hook up on that?:D :D

[DemoN]

Originally posted by mood_indigo

this house is costing me a lot more in extras than i anticipated:(


If you'd stop wasting money buying sh!t for da house you already had....you could have finished buying your audio stuff and you'd be jamming out to it already:read: :LOL: :LOL:

[mood_indigo]

Originally posted by DemoN


If you'd stop wasting money buying sh!t for da house you already had....you could have finished buying your audio stuff and you'd be jamming out to it already:read: :LOL: :LOL:


:LOL: :LOL: :LOL: i don't jam........ i groove:read:

[CKTA]

Originally posted by mood_indigo


this house is costing me a lot more in extras than i anticipated:(




:LOL: And you have a brand new house. Wanna trade w/ mine that was built in 1955? Now that's time and money!:D

[mood_indigo]

Originally posted by CKTA



:LOL: And you have a brand new house. Wanna trade w/ mine that was built in 1955? Now that's time and money!:D


:cussing: :cussing: :cussing:


it's not really the house itself that's costing all the money. it's the fact that it's our first house that's a kick in the pants.

[CKTA]

Originally posted by mood_indigo



:cussing: :cussing: :cussing:


it's not really the house itself that's costing all the money. it's the fact that it's our first house that's a kick in the pants.

I'm in the same boat!:D

[Outlawcrewcab]

Yes i still got the shell you can have it

[bosco]

Since noone answered me on my thread Ill ask on this one. Will a 20X8 rim with a 4.5 backspace work on a 96 Tahoe with a 4in drop?

[mood_indigo]

Originally posted by bosco
Since noone answered me on my thread Ill ask on this one. Will a 20X8 rim with a 4.5 backspace work on a 96 Tahoe with a 4in drop?



i don't know a whole lot about that body style, but my first thought is to say no. 5.0 inches, i believe is the desired BS you are looking for, but it also depends on what size tire you want to run. without that information, it's kinda hard to say for sure.

[Loki]

hey RJ if i roll the fenders up, would that work?

[mood_indigo]

Originally posted by Loki
hey RJ if i roll the fenders up, would that work?


it might. the only way to know for sure is to remove a wheel(preferably the passanger side) and measure out about 5.5 inches from the wheel mounting surface. use a plumb bob to see where that point is in relation to the fender lip. if it's inside the fender lip, then yes you can roll it. if not, then you're gonna have to do some fender massaging.


i've seen wheels with that width and BS on our bodystyle before, so i know it's possible, but i'm not sure what kind of body work is involved to make it work.

[DemoN]

You know what would be cool? Some kinda spread sheet or program where you type in the truck type, wheel size, backspacing, tire size, and amount of drop and it'll tell you if it tucks or not:read: :D :assclown:

[mood_indigo]

Originally posted by DemoN
You know what would be cool? Some kinda spread sheet or program where you type in the truck type, wheel size, backspacing, tire size, and amount of drop and it'll tell you if it tucks or not:read: :D :assclown:



it'd only be half as cool as a FSC calander:read: :D :assclown:

[DemoN]

Originally posted by mood_indigo




it'd only be half as cool as a FSC calander:read: :D :assclown:

:word: whoever screwed up on the calanders needs to be horse-whipped:read: :deadhorse

[Outlawcrewcab]

:D And only half as cool as a driveable slamed crewcab dually

[OrangeCrush]

Originally posted by outlawcrewcab
:D And only half as cool as a driveable slamed crewcab dually

:word:

[Loki]

i thought about the BSM Calculator before....that would be kewl as hell...:D