View Full Version : 01/02 Denali/Escalade trip computer
agreif
08-10-2003, 08:12 PM
I know that the 01/02 Denali/Escalades have the trip computer/driver information center that gives you the gas milage and all that other information. I was wondering if any of you had a picture of your dash so I could see what that display looked like and possibly a part number to go along with it. I am wanting to put the same in my truck. Thanks.
Andrew
Are you wanting to put the whole console in or just the DIC computer? I gotta look for the part number when I get home.
agreif
08-11-2003, 09:07 PM
I guess both if you have em. Better have too much information rather than too little. Pictures would be great if you have em!
Here's the part number to the DIC-->15082595. Here's a link to some pics I have. They're kinda crappy though.
http://f1.pg.photos.yahoo.com/ph/jenniferpearce@sbcglobal.net/lst?.dir=/My+Tahoe/Interior&.src=ph&.order=&.view=t&.done=http%3a//f1.pg.photos.yahoo.com/
agreif
08-12-2003, 09:11 PM
That's sweet. Did your tahoe have the console already in it or is that one from an escalade/Denali, I can't find taht console anywhere and have been looking on Partszoneonline.com for an hour. All they have are the ones that are sepoerate pieces, not the ones that flow into the console like yours. Is that an in dash 6 CD changer? All I have seen for the trucks for the partial console is piece 11 and 12 in the pic. There is a front cover for 11 but I figured I could use some smoked glass and make it look nice with a light beneath it to make it glow at night.
http://www.trademotion.com/schematics/images/G/GC00550.gif
Right now my interior has the lighter outlets and all that jazz underneath that little flip cover in the front dash, similar to the below pictures(without the consolle of coourse), so the console like yours would only work for me if I went and got another front dash piece that wrapped all the way around. I want to keep my seat in the middle though so I would only get that front extension and not the entire console. I don't think the escalade/denali wrap around kind come with just the front extension. What do you think?
http://images.cardomain.com/member_img_a/365000-365999/365534_7_full.jpg
http://images.cardomain.com/member_img_a/258000-258999/258907_15_full.jpg
Andrew
I had the stock console when I bought it. The console is from a Denali. I bought it piece by piece from ebay and salvage yards. Good luck getting one, all the parts usually dont come up at the same time. Yeah, I have the 6-disc changer too. JPCustoms still has one for sale. You might give him a call. I know the price is kinda high but that is actually cheap considering they go for over $3000 new.:eek:
agreif
08-13-2003, 11:52 AM
4 questions:
1. What about that plastic piece on the lower dash, did you have to get one to wrap all the way around?
2. What would you think is a reasonable price for a complete Denali console?
3. What did you do with your stock console?
4. Does the denali console have a front extension that could be used alone like the truck ones?
Thanks,
Andrew
1. I had to get the one from a Denali so the console would fit correctly.
2. I really don't know what you would consider reasonable. It all depends on how much $$ you're willing to cough up.
3. I sold it.
4. Nope...you have to have the back section to make it look right. It doesn't have a back cover so it wouldn't look good with the back open and exposed
agreif
08-15-2003, 12:42 PM
Do you happen to have any of the part numbers for this swap? I would like to look into thios a little more.
Thanks,
Andrew
Hot66ss
08-16-2003, 02:26 AM
what do i have to do to get that driver information center and escalde clock to work in my Silverado?
Thanks
Tom
agreif
08-16-2003, 08:35 AM
I've been told it is just a plug and plau when you get it. Just have to get the wiring down. I guess I'll find out. I'm sure some people here have done it though.
levelgrape
09-23-2003, 01:17 PM
Man if you had the part numbers that would be awesome your change over and Jason (jpcustoms) is exactly what I am after I want to change as much as possible over to a denali interior with my silverado. Do you have the part numbers from start to finish?
agreif
09-24-2003, 10:37 PM
Hey, the denali trip computer PN is above and the tahoe console PNs are in this link. can't help ya with the denali though.
http://www.fullsizechevy.com/forum/showthread.php?s=&threadid=77760
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
SEO by
vBSEO 3.6.0 PL2