KP Components 4 link 88-98

**datboychevy** · 06-19-2011, 07:49 PM

Hey i have a used KP Components 4 link that I'm looking to sell. It was on my truck for 2 months and I had no problems with it, I'm just stock floor body dropping my truck this summer and will not need it.

I'm looking for $400 plus $40 shipping to anywhere in the 48 states. I use paypal.

Thanks,

**tpichevy** · 06-20-2011, 03:52 PM

does it come with all the nuts and bolts? How would i go about runnin a coilover setup on this

**datboychevy** · 06-21-2011, 06:15 AM

All the nuts and bolts are included. Including the U-bolts. This would be perfect for coil overs. Bolt this kit on. Set your ride height and weld all the coil over brackets and support on and you will be set.

Please let me know if you are interested.

Thanks,

**tpichevy** · 06-22-2011, 07:28 AM

How much room would you say you pickup with the 4-link outside the frame vs the stock leaf springs when it come to BS on wheels. Im running 17x11s with 7" bs and a 345/40 DR tire. The main reason im lookin at goin 4-link is to keep the tires from rubbing the leaf spring.

**datboychevy** · 06-22-2011, 08:26 AM

It bolts to the axel in the same spot as the leaf springs. After leaving the axel the bars are angled towards the frame. The bars are 1" wide. Are the leaf springs 3" or 4" wide? I can't remember. If the leaf springs were 3" wide and the bars were 1" that would give you 1" clearance right there (measured from center of the spring/bar out towards the wheel) not counting the angled bars or the chance the you have wider leaf springs.