Announcement

Collapse
No announcement yet.

82 GMC k2500

Collapse

Unconfigured Ad Widget

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 82 GMC k2500

    Just sold 79 bronco and went out and bought 82 GMC 2500 for $500, truck is pretty much rust free, only rust is on inner front fender and there isnt much at all!!! the truck came wit blown 350, and 383 but somebody stripped cam and intake from 383 so i put 305(that i had built) in it....truck runs great but dont really no much about it...it came wit turbo 400 from factory, correct?? and it has d44 in front and 14b semi floater in rear?? thats a 9.5 ring gear not 10.5 right?? it is sittin on 33's wit 4in lift but i have 38.5 GUMBO MUDDERS that i would like to put on it....are the tires any good?? wat would i have to do to put them on??? i have heard mixed opinions about how i can put 3" BL on it and be fine...but others say no???? the truck is a mudd truck and occasional daily driver.....and id like to lock the rears up..or at least the rear..wat locker??? or should i go spool or posi or limited slip?? i was also told i could clear the 38's wit just 6" lift and no BL, is that true?? i would rather go 4" and 3" BL, cause wit 6" lift i would have to extend drive shafts, correct???

    any help is appeciated

    Thanks
    Jim

  • #2
    Re: 82 GMC k2500

    If its a 3 speed auto and the trans pan is shaped like texas its a turbo 400, if not its a 350. With the axles not sure, you'd have to look at the ring gear the combo sounds about right they usually have something like that, Gumbos aren't bad in mud not great on the street. With the body lift it might be close, most likely have to trim fenders though. not a chance on the 6" lift clearing 38s, 35s will rub with a 6" if your mean enough. Posi and limited slip are the same thing Posi traction just a brand name and I have an Auburn limited slip and really like it spools wear tires badly. And finally no, driveshaft length should be fine with a 6" lift but you have to grind a little bit off the CV cluster to keep it from binding.
    Last edited by ryan_thompson87; 03-17-2008, 11:17 PM.

    87 K30-355 Vortec TBI/TH350/208/Dana 60/14FF/4.56s/Detroit/37"Bogger/Ult.TBI Mods/XtremeFI FPR vac. reference/EP241 Pump/LS1 Fans

    07 GMC Sierra Classic - 2" Rough Country Full Leveling Kit/285 Duratracs/Gibson Exhaust/10% Tint/Billet Grille

    Comment


    • #3
      Re: 82 GMC k2500

      Hey man u got any pictures of her.




      Rednecks do it in the mud.

      If you choked a Smurk what colour would it turn

      My new projcet 79 Chevy 4x4 short box soon to be with a 33x12.50 with a 4 inch lift

      Comment


      • #4
        Re: 82 GMC k2500

        yes i have pics, i will try to post some of it when i get home from work. anybody ever do the headlight swap on the front?? im having a hard time tryin to find the right bumper with out paying an arm and a leg!!!

        Comment


        • #5
          Re: 82 GMC k2500

          can anybody explain how to post pics?? i have one from the day when i bought the truck but forgot to get some more today...i cant seem to fing the browse button..is there one to post the pic??

          Comment


          • #6
            Re: 82 GMC k2500

            You need to sign up to a photo sharing ex. Photobucket.com wedsite then upload ur pictures and copy the IMG Code and paste on your post




            Rednecks do it in the mud.

            If you choked a Smurk what colour would it turn

            My new projcet 79 Chevy 4x4 short box soon to be with a 33x12.50 with a 4 inch lift

            Comment


            • #7
              Re: 82 GMC k2500

              Well i finally got pics!!!!

              Here is the day i picked it up at the guys house before bringing it home...



              and here is after i put new engine in and washed it...






              Comment


              • #8
                Re: 82 GMC k2500

                and here are the rest...Sorry..i probly posted to many but here they are....

















                Again i apoligize :nopity: for all the pics but thats all of them and i won't post anymore...unless of course somebody wants them!!!!!

                Comment


                • #9
                  Re: 82 GMC k2500

                  500 bucks? In Indiana that's theft.
                  99 Silverado Z71 5.3 SI/DO Flowmaster 40 series Catback, Cranked torsion bars and Ford Keys, K&N CAI
                  Coming Soon: Tune, AAL or Blocks



                  84 C10 305 Comp .212/.212 @ .050 duration .440.440 lift cam 650 Edelbrock SS Wheels

                  Comment


                  • #10
                    Re: 82 GMC k2500

                    not for someone's old plow truck its not... the missing front bumper and bubble gum machine are a dead giveaway.
                    77 Chevy K20 - 80 GMC K2500 (in pieces)
                    90 Chevy K3500 - 93 Chevy C2500 (in pieces) - 94 Chevy K1500

                    Comment


                    • #11
                      Re: 82 GMC k2500

                      yes it was an old plow truch haha but i got rid of the plow and all controls...bubble gum machine?? roof light??

                      Comment


                      • #12
                        Re: 82 GMC k2500

                        its to bad you werent closer i want a cheap ****ty plow to do my families drives
                        Rides
                        1983 Chev K10 6" sus lift soon 3" body 33" mud terrains.
                        1988 Mazda B2200 bagged and bodydropped,Vette V8
                        1990 GMC 1500 2wd, 31" 2" lift rollpan rebuilt engine. FOR SALE!!
                        :fsc:

                        Comment


                        • #13
                          Re: 82 GMC k2500

                          i thought my tuck had 4" lift but i guess not if yours is 4" mine has to be more
                          Rides
                          1983 Chev K10 6" sus lift soon 3" body 33" mud terrains.
                          1988 Mazda B2200 bagged and bodydropped,Vette V8
                          1990 GMC 1500 2wd, 31" 2" lift rollpan rebuilt engine. FOR SALE!!
                          :fsc:

                          Comment


                          • #14
                            Re: 82 GMC k2500

                            when i bought the truck it came wit 35's also but i got rid of them they were like tractor tires and i think they were were like 35 and a 1/2 and cleared them fine....i have 38's i will be putting on and when i do that i will have 1200 to 1300 into the truck

                            Comment


                            • #15
                              Re: 82 GMC k2500

                              i paid 1625 for mine as she sits about 700-900 in parts and it should be on the road
                              Rides
                              1983 Chev K10 6" sus lift soon 3" body 33" mud terrains.
                              1988 Mazda B2200 bagged and bodydropped,Vette V8
                              1990 GMC 1500 2wd, 31" 2" lift rollpan rebuilt engine. FOR SALE!!
                              :fsc:

                              Comment

                              Working...
                              X