Announcement

Collapse
No announcement yet.

1985 chevy k10 4x4 problems

Collapse

Unconfigured Ad Widget

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1985 chevy k10 4x4 problems

    hey ive had this truck about a year and for some reason the front wheels dont turn when i put it in 4hi or lo not sure what to check on these trucks any suggestions or help would be nice

  • #2
    Re: 1985 chevy k10 4x4 problems

    Front driveshaft in place? Do you have auto or manual locking hubs?

    Comment


    • #3
      Re: 1985 chevy k10 4x4 problems

      front drive shafts is in place have auto locking hubs

      Comment


      • #4
        Re: 1985 chevy k10 4x4 problems

        The auto hubs are more than likely ****ed. Pull them out and check. Replace with manual locking hubs.

        87 K30-355 Vortec TBI/TH350/208/Dana 60/14FF/4.56s/Detroit/37"Bogger/Ult.TBI Mods/XtremeFI FPR vac. reference/EP241 Pump/LS1 Fans

        07 GMC Sierra Classic - 2" Rough Country Full Leveling Kit/285 Duratracs/Gibson Exhaust/10% Tint/Billet Grille

        Comment


        • #5
          Re: 1985 chevy k10 4x4 problems

          do i need a kit for auto to manual hubs or would some of the manual warn hubs be a direct replacement?

          Comment


          • #6
            Re: 1985 chevy k10 4x4 problems

            Direct replacement. Just pull the autos out and stick manuals in.

            87 K30-355 Vortec TBI/TH350/208/Dana 60/14FF/4.56s/Detroit/37"Bogger/Ult.TBI Mods/XtremeFI FPR vac. reference/EP241 Pump/LS1 Fans

            07 GMC Sierra Classic - 2" Rough Country Full Leveling Kit/285 Duratracs/Gibson Exhaust/10% Tint/Billet Grille

            Comment


            • #7
              Re: 1985 chevy k10 4x4 problems

              What do you mean when you say that the front wheels don't turn?

              Are you saying that they cannot turn left and right - as in the steering wheel is locked up?

              Or do you mean that the wheels cannot rotate and get dragged along- as if the brakes are locked up?

              Or do you mean that you have lifted the up jack stands, shifted the transfer case to either 4WD position, started the engine, put it in drive and observed that the wheels just remain stationary?

              I don't get it. How can your wheels not turn?

              Are you really trying to say that you feel that there is no power being transmitted to the front wheels?

              Comment

              Working...
              X