Puttin together my new system..gonna be huge,..need some advice from you all

[Nickleahy23]

Well i have some money comin my way from student loans so i figure its time to start my new system. First i want a screen. Whatever is the best out there. ill have to do some looking. I want to run 1 18" solo X and do it in a blow through. Then looking at a hifonics Colossuss amp. I dont know where to mount the amp though. Let me know your thoughts on this. I will be running 2 optimas and a high output alt. 1/0 gauge wire, all high quality wires..Still gotta decide on some component speakers also..Probably going to be around 3k for everything. Thanks for the help guys.

[BassBaller5]

man it sure will be LOUD. but good luck gettin it under 3k unless you have some serious hook ups. the 18" will be over 1k alone.. and the colossuss aint pocket change either. then a 2 channel, a headunit (the "best out there" can be another 2k.).. it builds up. but deffinatly keep us updated. id love to see an 18" blow through

[Atomic]

might wanna consider 2/0 wire for an amp that big...

[Mattman24]

might wanna consider 2/0 wire for an amp that big...

yeah it would be better but its not needed 1/0 wire if short should be good coming from one of the optimas, i would put 2/0 to the batteries though from your alternator;

you will need a 300amp + alternator too

the colossuss aint that much guys lol, ive got 2 goin in the tahoe
http://www.sonicelectronix.com/item_...-COLOSSUS.html
only 650

maybe look into this amp if u want more power
http://www.sonicelectronix.com/item_...o+HK4000D.html
deffently need some 2/0 for that

[Mattman24]

yeah it would be better but its not needed 1/0 wire if short should be good coming from one of the optimas, i would put 2/0 to the batteries though from your alternator;

you will need a 300amp + alternator too

the colossuss aint that much guys lol, ive got 2 goin in the tahoe
http://www.sonicelectronix.com/item_...-COLOSSUS.html
only 650

maybe look into this amp if u want more power
http://www.sonicelectronix.com/item_...o+HK4000D.html
deffently need some 2/0 for that

solo x 18 for only 700
http://www.sonicelectronix.com/item_...ual+1+Ohm.html

[///M5]

If it were me, and I were doing what you were doing I'd lean towards:
http://www.soundsolutionsaudio.com/s...&productId=152
and a pair of BTL 18's
https://ssl.perfora.net/www.ficaraud...iew.shopscript

[BlackTahoe]

what is EXmax, on kicker's site. I guess it's Xmech. Kind of feels like they are insulting your intelligence.

Hey, OP, have you looked into bed coves yet, 3k doesn't seem like nearly enough.

[BassBaller5]

yeah it would be better but its not needed 1/0 wire if short should be good coming from one of the optimas, i would put 2/0 to the batteries though from your alternator;

you will need a 300amp + alternator too

the colossuss aint that much guys lol, ive got 2 goin in the tahoe
http://www.sonicelectronix.com/item_...-COLOSSUS.html
only 650

maybe look into this amp if u want more power
http://www.sonicelectronix.com/item_...o+HK4000D.html
deffently need some 2/0 for that

good call matt, i was thinkin of the Goliath

[Nickleahy23]

thanks for all the info guys...ya i was also looking into the BTL's but ive always really liked kicker...i have a little bit of time to figure it all out, i was just throwin some ideas out there.

[///M5]

Here is some more info on the Sundowns...
http://www.soundsolutionsaudio.com/f...showtopic=7900

[BlackTahoe]

How much airspace do you think you can get out of your bed.

[Polecat]

instead of the power hungry Solo X, how about 4 good 12's in a enclosure?

[Nickleahy23]

it will be plenty for 2 18's that all i know right now lol....I think for the time being im just going to get 1 18" BTL and then run it in my back seat. I need to wait until i get the work done in the bed for the airride before i can figure out what i have to do for a blow through back there. So just run that one 18 until spring then get workin on the bed and then get another 18 and build a blow through.

[Polecat]

what is EXmax, on kicker's site. I guess it's Xmech. Kind of feels like they are insulting your intelligence.

Hey, OP, have you looked into bed coves yet, 3k doesn't seem like nearly enough.

yes, it's Xmax, or Xmech..

[BlackTahoe]

it will be plenty for 2 18's that all i know right now lol....I think for the time being im just going to get 1 18" BTL and then run it in my back seat. I need to wait until i get the work done in the bed for the airride before i can figure out what i have to do for a blow through back there. So just run that one 18 until spring then get workin on the bed and then get another 18 and build a blow through.

Sounds good, I was wondering about those tanks back there and whether or not you had to cut into your bed to get the truck as low as it is in your sig. With an 18" you might not be able to mount them vertically, which would force you to use alot bigger footprint. Or have the subs in the cab with just the box in the bed.

[BlackTahoe]

yes, it's Xmax, or Xmech..

So I'm guessing ~ 18-20 mm xmax

[Polecat]

rated, but the L series and X's have a t-cut top plate, which leaves more coil in the gap, so it makes the woofer Xmech rating seam smaller, than what it really is.

[Nickleahy23]

Sounds good, I was wondering about those tanks back there and whether or not you had to cut into your bed to get the truck as low as it is in your sig. With an 18" you might not be able to mount them vertically, which would force you to use alot bigger footprint. Or have the subs in the cab with just the box in the bed.

The tanks are under the bed...I will be able to go from the front of the bed back to about where the stock wheel wells are, but may bave to make it get narrower in the back to go between the tubs ill be puttin in..I know i wont be able to mount them vert, so i was thinking of doing like a V shape when the slanted either facing each other or both facing into the cab...its still on the drawing board as you can see lol..heck who knows i may just keep one 18 in my back seat like i had my 2 15"s before..well see

[bgraff1]

here is my blow thru for 4 15's i like how they are set up, if you want some ideas. i used a alpine IVA-W200 for the H/U and i love it. http://s158.photobucket.com/albums/t...urrent=009.jpg

[Nickleahy23]

id like to have mine like that, but an 18 wont fit vertically, so it will have to be sort of slanted...looks nice though good work