LinkBack URL
About LinkBacks
Reply With Quoteyou might have to have it flashed by the dealer to accept the DIC controls
|
|
|
This is a discussion on Trouble enabling full DIC on 2008 Silverado within the Audio/Video Electronics forums, part of the General Discussion category; GM sells the panel for $100 with the DIC buttons. My model has the trip meter button to enable the ...
GM sells the panel for $100 with the DIC buttons. My model has the trip meter button to enable the limited DIC functions. I removed the left trim panel, and it had a harness for the DIC buttons. I tried connecting every set with a piece of safety wire to see if I could get anything, but they do nothing at all in any configuration. Do I have to do something to disable the trip button changing it? I'm confused.
Here's the panel inside...you can see the blank for the buttons
Here's the harness. Pinning it out didn't give any results. Ideas?
you might have to have it flashed by the dealer to accept the DIC controls
Hm. I'll call them up and ask.
Well, they weren't sure, but it costs $120-$250 to do any kind of flashing. That is super ghey. Can't get anything for free these days.
Posting Permissions
 |
Bookmarks