37 Chevy PU - Master Cylinder

**roreri** · 01-19-2006, 08:32 PM

Hi all... I'm new to this forum, and I hope ya'll can help me. I was rebuilding the master cylinder of my bone stock 37 Chevy 1/2 ton Pickup and one of the rubber washer type things inside, is torn on one side.

Does anyone know where I can get parts for this ole' truck?

Thanks in advance all !!!

RoReRi

**AntiBling** · 01-20-2006, 10:22 PM

I was able to go to the local parts store and pick up a master cylinder rebuild kit for my '49. So check there. It was like $15 or something.

If they dont have it, go over to www.stovebolt.com and ask the guys there, they would know.

**joakwin** · 01-21-2006, 02:25 AM

if ur looking to upgrade the front suspension of ur 37 truck and want a ifs,
the front suspension from a fiero will bolt up to the frame of the 37, but u have to make one bracket for the rear mount of the lca's
its a ifs with disc brakes and rack steering
its kind of a small bolt pattern tho but can be had for less then 500 bucks for it vs 1700 plus for an aftermarket kit, and u can find bigger better brakes for the front end of those fiero's now a days

this is the front suspension im gonna do on my 37 chevy 3/4 ton, but im gonna bag it and i also have a irs with 3.50 or 3.90 posi in it for the rear suspension and thats gonna get bagged also,
and im looking for a 4.3 tbi or a 5.7ls1 for the motor on this ride, and a 4l60e or a 700r4
not sure witch motor combo yet
and im planning to roll some large cragar ss rims, 20's or 22's

lates

**roreri** · 01-21-2006, 07:46 AM

Thanks guys!!! This 37 is just like it came off the show room floor. Except the engine and drive train has been rebuilt in the mid 60's by my father inlaw. That was only 700 miles ago. He kept it garaged and drove it around the block every so often to keep the battery charged.
So I would be doing him a diservice to mod it.
Thanks for all the info!!!

RoReRi