LinkBack URL
About LinkBacks
Reply With Quoteit may be possible, most ppl who run 315s on stockers have atleast a 3" bodylift. If would be very close but you will have to do some major trimming for them to fit. I say stick with 305's, they still look stuffed on stock z's.
|
|
|
This is a discussion on Which tire size 315 or 285 within the Offroad forums, part of the General Discussion category; I have a 2000 chevy silverado reg cab and im currently running 265 75r 16s, but i need new tires ...
Which tire size 315 or 285
I have a 2000 chevy silverado reg cab and im currently running 265 75r 16s, but i need new tires and i wanna go a size up or two. would i be able to fit 315 75r16s on my truck i do have an add a leaf in the rear and the torsion bars are cranked in the front. now i know that i can fit 285s and 305s on there but i wanna know if 315s will fit, can anyone help?
also i have stock 16x7 rims will the 315s fit on them thanks.
Chris
it may be possible, most ppl who run 315s on stockers have atleast a 3" bodylift. If would be very close but you will have to do some major trimming for them to fit. I say stick with 305's, they still look stuffed on stock z's.
no way, especially not on a nbs
awesome sig(s) xZoomerZx!
1996 silvy, 6"bds, sf14bolt, eaton elocker, precision 4.56s, 37" claws;
383ci vortec, compcams 218/224 .495"/.502" 110*;
longtubes, magnaflow exhaust, 0411
2006 Infiniti G35 - dropped on coils, bottle-fed
You aren't gonna fit 315s on a NBS without a body lift. Just go with 305s. They will fill up the fenders and you may even have to trim slightly to fit them. I barely fit my 285s without trimming before the lift with just the torsion bars cranked.
2009 Silverado Ext. Cab Vortec Max 4x4
2.5" Total Performance Leveling kit, 5% Tint
Mods to come(some day): 8" Suspension & 35x14.5 Iroks, 4.88 Yukons, Detroit True Trac, LTs and Magnaflow muffler, Blackbear Tune
it could happen but you would need to become very good friends with this little guy--->
SAS'd 97' k1500 ECSB 350/th400/205/60/14/5.13/detroits/cut boggers/H1/227K
SAS'd 99' k2500 CCSB 454/4l80e/243/44/14/4.56/245k
Originally Posted by Madison
you should be able to fit. I got a 02 half ton reg cab with a 3 inch body lift, cranked up torsion bars to level it off. and 315/75r/16 on a 16 by 8 rim and it fits with not rubbing.
I have to agree.
'96 K1500 Ext. Cab, 5.7 w/Upgraded Spider Injectors, S&B CAI, 6" RCD, Flipped BJ's, 35" BFG M/T's On Ultra Xtreme's, Yukon 4.56's & True-Trac, Dual Flow 40's, Wet Okoles, Line-Xhttp://www.cardomain.com/ride/1281046/1Sig By alphaecho4386
no way 315 will fit, my 315s rubbed on my 6inch
Chevy 2001 z71 1500 5.3, 4.56, Flowmaster, K&N Generation II Air Intake Kit and a Tune by JESSEBUBB
6inch Procomp /3inch PA bodylift / Micky Tompson 16x10 / 37x13x16 Boggers
Marine, I'd go with 285/75, I had them on my truck before I lifted it, and they looked fine, filled out the fenders...
285 maybe, i have a '94 stock height (for now) and i am running 285/75/16's with absolutly no rubbing but a 315 would do some damage
Posting Permissions
 |
Bookmarks