35x15.50 tsl's on rcsb 94Z71 with 3" bl?

[LiftedWhite94]

anyone got pics of em? im runnin 33s now on 15x10 wheel and it just totally clears the hell outta the 33 12.50s. I seen the tires at local shop and I gotta have em. I think im just gonna run bias ply instead of geting radial tires. whats should I do? I do alot of drivin, about 500miles a week or more. if anyone has pics of 35x15s on a x10 wheels on a obs truck with 3" bl and crank post em please and your opinons!! thanks alot!

[HELLFIRE]

You will wear the fender out. That tire is very true to size and has very large lugs. A buddy of mine had 35x16x16.5's on his obs with a 6" and 3/4 ton bars and it would rub when he turned and hit a bump. And when a TSL lug grabs a fender it does a lot more than most other tires.

[LiftedWhite94]

well, thanks for the advise. I might try and run 36x12.50s radials, same tire my friends runnin on his 96' with 3" bl and they dont rub. I dont offroad and when I do its just in soft thick mud nothing rough or hardcore. either way, I gotta have some TSL's!!

[StockKnocker]

Get 35" ssr's they look great, ride great and will take any m/t out there.

[bassboi_2006]

in my eyes i like stuffing tires.you can either go tall and narrow or short and fat.i wanted short and fat but after almost losing my bumper to a 35x15 on a 15 x12.........i am running a 33x12.50 right now .i went with a 37x13 bogger on a 15 x8 that i am about to put on before it gets dark to prove it can be done

[HELLFIRE]

Get 35" ssr's they look great, ride great and will take any m/t out there.

uuuuhhhhh.... No

They are good. But they do not compare to a regular TSL, Bogger or Irok.

[LiftedWhite94]

So what Tire should I run 35 12.50? I'm thinkin of just getting 36 12.50 radial TSL. Whats your opinon hellfire? My friend has a set of 37x12.50 radial TSls that are worn down alot. about 35% thread left he will sale me for 200$ I'm just not sure if I could fit 37s. I wouldnt mind cuttin my fenders a little, They arnt much taller then my 315 stuckshots i had on my truck. anyone think they could fit with a little trimming concidering i dont offroad?

[HELLFIRE]

If you are goin gto do it and want a real aggressive tire then just go TSL or bogger. The TSL's would clear a little better.

[Cajun4x4]

just get some 36x13 bias TSLs they're realy not that hard to clear

[midnite rider]

Seems like alot of body lift. I think the frame is gonna hang way down there friend. Ever consider a suspension lift and go 4 inches. should clear well and look good too.

[tatez71]

I dont think Swampers are for you if you drive around 500 miles a week! No matter which one they are (radial,TSL,ect..) you drive that much your tires are gunna be gone in no time & then you'll be sad your swampers are bald!

[LiftedWhite94]

Yeah, I drive way to much, I really like the look of TSL's thats why I want a set so bad. MY friend runs nothing but radial tsls on his trucks and he gets about 30,000 miles out of them. he takes care of them and dont offroad either but dose alot of out of state driving and he gets alot of mileage out of his 36 radial tsls. how many miles are you people getting out of bias tsls? I'm sure my ass would be better off with the radial conciderin i stay on the roads damn near all the time!

[wickedgmc]

with the way you drive id look into an SSR.

[iridektm]

dude, imo get a radial. MTZ or something would look kickass.

I saw some atz's in person the other day, in a 36" and there is no way you could clear those with 3'' i dont think. They look kickass though. look into that. or a toyo m/t look pretty good, non as good as the tsl.

but do the math. 500x2=1000

1000 miles every to week. excpect about 15k from a bias tsl maybe 20k. not to many weeks on those tires my friend.

anything will look good though bro. look at the procomp x-terrains

[bassboi_2006]

for all of you that wanted to see it

[LiftedWhite94]

well, I'm thinking bout going 35x12.50 stuckshots. there cheap. thanks everyone for yalls help! btwL heres some pics of how much my truck clears the 33 12.50s

I took these with my camera phone, My front fenders arnt even cut or beat in and there clearing by almost 3" at full lock. you might not can tell you they are.

[ChevyMan02]

Those tires prob. measure 31 or 32" and 10-11" wide and no where near the size of a 33x12.50 or 35x15.50 TSL. With that said yes you can clear 36x12.50s if you crank but you will rub the frame at full lock. The 36x12.50 TSL radials have smaller lugs than the rest of the TSLs and look more like an m/t. The only problem I see is the backspacing of your x10s there gonna push the tire into the fender more than my 16.5x9.75s, so you may have more of a problem but its definitely doable. I just let the tire push in the fender lip and trimmed the bumper a little bit. pics are in my gallery

[MStefak]

Seems like alot of body lift. I think the frame is gonna hang way down there friend. Ever consider a suspension lift and go 4 inches. should clear well and look good too.

Wow . You are a genious eh ? I never see anything true to life come out of your mouth. Do you have any idea how many trucks on this site run a 3" BL ? EVERBODY already knows you get to see the frame ... freind.

You should clear the 36's .. I did it on just a 3" BL, ill find some pics and load them up next time im home.