GM Inside - Muscle Cars - Jeep

Support FSC and see no ads! - Click Here
Page 1 of 8 123 ... LastLast
Results 1 to 20 of 149

10 inch lift on 1986 3/4 ton chevy silverado

This is a discussion on 10 inch lift on 1986 3/4 ton chevy silverado within the Offroad forums, part of the General Discussion category; got everything ordered up to do my 10 inches plus 38 inch tires. just wondering if i should do a ...

  1. #1
    Livin' truck by truck Muddin_Maniac89's Avatar
    Join Date
    Nov 2008
    Location
    Monroe Township, NJ
    Age
    24
    Posts
    437

    Talking 10 inch lift on 1986 3/4 ton chevy silverado


    Support FSC and see no ads! - Click Here
    got everything ordered up to do my 10 inches plus 38 inch tires. just wondering if i should do a single lengthened driveshaft or toss in an extra cv joint? what do you guys think about this? plus does anyone have any pics of this body truck with the same lift and tire combo just so i can see what im gonna look like at the end? thnx guys.
    Sig Removed By Staff

    Max size is 500 X 200

  2. #2
    Need to be bigger!!!!!!! speedjunkie's Avatar
    Join Date
    Feb 2002
    Location
    Pittsburgh PA
    Age
    35
    Posts
    4,186

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    Should be a regular cag long bed so a one piece drive shaft should work.
    Damian

    2011 GMC CC 4x4 6.2 black
    1998 Chevy ECSB 4x4 black full Throttle on 38s, traded.

  3. #3
    Livin' truck by truck Muddin_Maniac89's Avatar
    Join Date
    Nov 2008
    Location
    Monroe Township, NJ
    Age
    24
    Posts
    437

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    yeah its a reg cab long bed truck. ok. its just the guy at the welding shop said i might have to go with an additional cv joint due to vibration but hopefully i wont have to because this lift and tires is runnin my wallet dry. haha.
    Sig Removed By Staff

    Max size is 500 X 200

  4. #4
    Livin' truck by truck Muddin_Maniac89's Avatar
    Join Date
    Nov 2008
    Location
    Monroe Township, NJ
    Age
    24
    Posts
    437

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    anybody else?
    Sig Removed By Staff

    Max size is 500 X 200

  5. #5
    . GREY-GHOST's Avatar
    Join Date
    Oct 2006
    Location
    Florida
    Age
    26
    Posts
    1,889

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    12"

    13"

    Blazer in my sig is at 9-10"

  6. #6
    Team Fuel Motorsports BigBlue02HD's Avatar
    Join Date
    Jul 2004
    Location
    Landenberg, PA
    Age
    33
    Posts
    1,363

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    Buddies 87' 3/4 ton... 6"/3"BL/37's:



    02' 2500HD-
    Cognito/PA/Bilstein/Weld Racing/Toyo/RCX/N-Fab/Blackbear/Magnaflow/Edelbrock/MAC/Kool-Vue/Recon

    05' Yukon SLT-
    Magnaflow/Gibson/McGaughys

    99' RCSB 1500-
    Green CAI/Flo-Pro/HD hood/Nitto/FJs/Bilstein/RCX


  7. #7
    . GREY-GHOST's Avatar
    Join Date
    Oct 2006
    Location
    Florida
    Age
    26
    Posts
    1,889

    Re: 10 inch lift on 1986 3/4 ton chevy silverado


  8. #8
    Team Fuel Motorsports BigBlue02HD's Avatar
    Join Date
    Jul 2004
    Location
    Landenberg, PA
    Age
    33
    Posts
    1,363

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    ^^^ Haha... thats what he'd say about your Blazer!!!


    His truck is apart right now for "restoration"!!!
    02' 2500HD-
    Cognito/PA/Bilstein/Weld Racing/Toyo/RCX/N-Fab/Blackbear/Magnaflow/Edelbrock/MAC/Kool-Vue/Recon

    05' Yukon SLT-
    Magnaflow/Gibson/McGaughys

    99' RCSB 1500-
    Green CAI/Flo-Pro/HD hood/Nitto/FJs/Bilstein/RCX


  9. #9
    the sea hates a coward rebelbowtie's Avatar
    Join Date
    Aug 2003
    Age
    26
    Posts
    7,354

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    oh boy there is alot of sex in here.

  10. #10
    Registered User 81chevyc2500's Avatar
    Join Date
    Dec 2008
    Location
    ct
    Age
    23
    Posts
    70

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    i know a couple of trucks running 40s and running 12 inches of lift and they had just a straight driveshatf
    86 k2500 blown motor getting 14 bolt ff with locker and d60 up front 6inch bds suspension and boggers

    86 blazer 4 inch lift getting boggers soon and a winch

    86 3/4 ton 2wd work truck 4spd stock

  11. #11
    . GREY-GHOST's Avatar
    Join Date
    Oct 2006
    Location
    Florida
    Age
    26
    Posts
    1,889

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    Quote Originally Posted by rebelbowtie View Post
    oh boy there is alot of sex in here.
    oobs orgy!

  12. #12
    the sea hates a coward rebelbowtie's Avatar
    Join Date
    Aug 2003
    Age
    26
    Posts
    7,354

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    Quote Originally Posted by GREY-GHOST View Post
    oobs orgy!
    btw youre obligated to make laurens truck look like this


    you have until friday

  13. #13
    . GREY-GHOST's Avatar
    Join Date
    Oct 2006
    Location
    Florida
    Age
    26
    Posts
    1,889

    Re: 10 inch lift on 1986 3/4 ton chevy silverado



    I see you found my inspiration pic.

  14. #14
    . GREY-GHOST's Avatar
    Join Date
    Oct 2006
    Location
    Florida
    Age
    26
    Posts
    1,889

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    How bout this


  15. #15
    the sea hates a coward rebelbowtie's Avatar
    Join Date
    Aug 2003
    Age
    26
    Posts
    7,354

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    i like the first one better

  16. #16
    . GREY-GHOST's Avatar
    Join Date
    Oct 2006
    Location
    Florida
    Age
    26
    Posts
    1,889

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    When she gets another dd, Then I'll have my way with it.


  17. #17
    Newbie silver98Z71's Avatar
    Join Date
    Oct 2006
    Location
    Tifton, GA
    Posts
    3,222

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    A friend of mine is running stock shafts on his '84 ton truck with 12" springs and 40" Hawgs. No problems. If you get your lower joint angle correct, there will be no vibrations.
    Last edited by silver98Z71; 10-17-2009 at 12:18 PM.
    -Daniel
    1998 K1500 L31/4L60e/241/8.5/9.5
    Bogger Chapter

    Some people are just educated beyond their intelligence.
    -Jerry Clower

  18. #18
    Livin' truck by truck Muddin_Maniac89's Avatar
    Join Date
    Nov 2008
    Location
    Monroe Township, NJ
    Age
    24
    Posts
    437

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    awesome guys. thnx for those awesome truck pics btw. i was hoping that 10 inches and 38.5x14.50 thornbirds wouldnt look stupid and all those trucks look pretty decent. i might need a shim kit to correct my joint angles though.
    Sig Removed By Staff

    Max size is 500 X 200

  19. #19
    Wants a SFA! BigChevy17's Avatar
    Join Date
    May 2009
    Location
    Ocala, FL
    Posts
    699

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    this thread is pure sex
    not mine but id sure as hell kill for it



    and those are 42 TSLs

    02 Chevy 1500 ECSB/5.3L/6" RCX/35x12.50r17 Baja Claws/17x10 UM Rouge/Rockford Fosgate 1500w amp/120W 6 Strobe Kit/Glasspacks/TurnDowns/No Cats/iPad

  20. #20
    Registered User Seabee15's Avatar
    Join Date
    May 2006
    Location
    Rochester NY
    Posts
    597

    Re: 10 inch lift on 1986 3/4 ton chevy silverado

    Great Posts!! Geezus man, makes you really appreciate the good ole days!
    1986 Chevy CUCV M1008 w/ Western 7'6 Unimount **sold to a good home**
    2000 Chevy 1500 7"+3" w/ 38x15.50s (
    2006 Chevy 2500HD w/ western 8' ultramount <-Daily Driver / Tow Rig

    Rolling Nicely.

Page 1 of 8 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •