Nice, going for a lift!
Might look at some coil spacers and blocks. Also check out Fabtech,, I think they used to make lifts for a truck like yours but im not sure if they still do..worth checking out though
![]() |
|
This is a discussion on Help find a lift kit? within the Offroad 2WD forums, part of the Offroad category; I got myself a 82 C30 Dually with a 454 in it. I have a build thread in here under ...
I got myself a 82 C30 Dually with a 454 in it. I have a build thread in here under that section. Now that i got it running and stopping I want to slap a lift kit on it. I don't want to go to extreme that I start wearing out parts quickly, just something to make the truck look a little more badass haha I am thinking maybe just a mild 2 inch lift? However I just cannot find info on this subject. Where can I get a lift kit? What am I going to be replacing? I can figure out how to do it but I just want to know what I am getting myself into. Thanks for the help guys!
Nice, going for a lift!
Might look at some coil spacers and blocks. Also check out Fabtech,, I think they used to make lifts for a truck like yours but im not sure if they still do..worth checking out though
06-2wd-4.8-5speed-LR4-Z85-40series-Baja 8s-TrueTrac-4.30gears-J&S Performance Tune
http://www.fullsizechevy.com/forum/i...2006-rcsb.html
Coil spacers? My truck has leaf springs, I have not seen any coils on it? Sorry but newb talking here haha. I will check them out though, thanks!
is your front end leaf sprung?? if so then you can either get some longer shackles or will have to get new leaf springs.
does your front end look like this?
![]()
i got the last set of fabtech 4.5" knuckles on earth!(well i did for awhile)
I almost wish it was, I think that would make lifting it that much easier. But the front has coils I just figured out
Yeah coil spacers in the front. Blocks in the back.
06-2wd-4.8-5speed-LR4-Z85-40series-Baja 8s-TrueTrac-4.30gears-J&S Performance Tune
http://www.fullsizechevy.com/forum/i...2006-rcsb.html
Yeah coil spacers or lift coils for 2" lift.
i got the last set of fabtech 4.5" knuckles on earth!(well i did for awhile)
The blocks go in between the axle and the leaf springs in the rear.
The coil spring spacers go on the top or bottom of the coil.
Check out Daystar or Springtech and maybe some others. See if they have a set for your truck.
06-2wd-4.8-5speed-LR4-Z85-40series-Baja 8s-TrueTrac-4.30gears-J&S Performance Tune
http://www.fullsizechevy.com/forum/i...2006-rcsb.html
Bookmarks