LinkBack URL
About LinkBacks
Reply With QuoteSweet!
|
|
|
This is a discussion on Post cam swap dyno numbers - 310 rwhp! within the Performance forums, part of the General Discussion category; I swapped in a VHP 062 cam & springs, ASP pullies e-fans and a tune last June and finally got ...
I swapped in a VHP 062 cam & springs, ASP pullies e-fans and a tune last June and finally got some new dyno numbers.
The previous best was 260 hp and 279 tq in 2nd gear. That was with a K&N FIPK, ASM headers, and a Magnaflow cat-back.
Saturday I got 300 hp and 301 tq in 2nd gear. So the new mods were worth 40 hp and 22 lb-ft.
With the speed limiter now removed I was also able to finally dyno to red line in 3rd. Those numbers were...
310 hp and 322 lb-ft of torque!
I've got videos and will up load them later.
Last edited by tdrumm; 10-17-2005 at 08:04 AM.
RIP Billy, aka budhayes 3
Sweet!
nice numbers
D/D-2006 HHR 1LT 5-Speed.
1996 Silverado, 5.7, FIPKII, Elect Fans, S/S Headers, Duals, Wait4Me, 4/5 drop on 18" Weld Evo Velosity's. STOLEN ON 9/9/2006
what are the specs on the cam?
nice results!
Cam specs:
210/218 duration @ .050, .551/.551 lift, 112 LSA, 5 degrees of advance ground in the cam. I installed it dot to dot.
RIP Billy, aka budhayes 3
Posting Permissions
 |
Bookmarks