RnuovZ71 SAS build

[RnuovZ71]

I have finaly collected most of the parts I needed to start the SAS on my 92 ECSB Chevy. This next week I will be getting my springs in along with all the stuff for my hydro steering. Tomorrow I'm going to order my detriot lockers and 4.56s front and rear. it should be 9" in front and 8" in the back.

What I would like to have done still Is get the bed sprayed w/ rhino liner(or the like), I would also like the have the quarter panels rhino lined. Then I need a new motor. The list goes on with odds and ends, but It will slowly come along.

This is the list of stuff I have so far...

78 dana 60 kingpin front.
87 dana 70 rear.
ORU SAS kit +6" in spring length.
16x10 Black steel rims.
Kingpin rebuild kit.
New pads/ shoes for the brakes.
new ujoints for the axle shafts.
37x13.50 mickey thompson Baja Claws.
4.56s Front & Rear.
Detriot lockers F/R.
Hydro steering stuff.
Draglink.
Steering arm.
Tie rods.
Brake lines.
Hub Bearings.
Ubots and Ubolt plates.
Ujoint rear axle.
Front driveline.
Shocks.



The truck Is complete... Things to come in the near future: 6.0 swap, Rear bumper build, And a new stereo!

[JWolfe75]

Are those teflon? they look good, should be easy to clean also.

[RnuovZ71]

The lockers and 4.56s with be here tomorrow (wed). My hydro stuff should be here fri. The damned spring will be here next week.

I have more pics to upload.

[RnuovZ71]

Are those teflon? they look good, should be easy to clean also.

They're cast black with a teflon coating. BTW I hope so :LOL:

[BagginA93chev]

cool project

[gearz]

Can't wait to see more. looks like parts pile is growing!

[RnuovZ71]

Can't wait to see more. looks like parts pile is growing!

Oh it is. I cant wait to have it done just the way I want it.

here is one teazer pic of the D70 gears, I have more pics tonight...

[RnuovZ71]

Like I said MORE pics of the stuff in my shop...

I have to get better pics, the ones I uploaded look like ass. But here are a few...

The rims


The rear d70


The front d60

[red4x4chevy]

So whenever you feel like it you can box up that old lift and send it to my house.

[RnuovZ71]

All my hydro assit stuff came in today(i'll get pics later). How ever I need to go and get a rebuild kit for the PS gear box/ find and rebuild a 2wd gear box so I can get a drop pitman arm. the ram is a 2x8 single action from PCS...

I'm still waiting on my springs. A frind of mine is going to show/ teach me how to set gears. So I can get the rear D70 in place(I may even do a shackle flip). Then I need to remove the BL and ALL spacers. I still need to clean out the in part of the axle B4 I set the gears and set in new seals. So I hoping for a productive week end.

[m3gumby]

looks like a great build. subscribed

[1ugly88]

subscribed

[RnuovZ71]

Crap, I ran into a little snag. when I ordered my springs I told the guy go head and run my card. So this intire time I thought I prepaid and come to find out they wherent. I guess the guy didnt do it. So now I have to wait till my next pay check to get them.
And I dont get paid untill the 15. Oh well looks like it will only slow me for 2 weeks. I am going to however get EVERYTHING ready for when the spring get here I can just get everything mounted.

[tonxcab]

Are you selling the old lift kit

[Koots]

Nice pile of parts, which equates to a nice chunk of change
Good to see the SAS underway though and good luck.

Subscribed

[RnuovZ71]

Are you selling the old lift kit

I have a sale pending

Nice pile of parts, which equates to a nice chunk of change
Good to see the SAS underway though and good luck.

Subscribed

Thanks, and yea I have about 4000 dollars worth of Parts in my shop. I still have a little ing to do to the truck but thats all minor stuff.

[JAMin747]

looks like its slowly coming along subscribed

[Toolman]

[GMC Sierra]

looking good

[FordeatinZ71]

oh hell yea man! this is a build i've been lookin forward to for a bit...can't wait to see it done...good luck with it all!