Just Bought an 04!!

[AirBagd]

Sup all? Haven't been on here in awhile, I used to have a 02 ext cab silverado lowered 5/7 on 20" KMC Thunders, but was stuck in a car for awhile. Just picked up an Red 04 Std. cab. Thinking of running a 3/5 or 4/6 with some 22's. I had Belltech spindles, and djm springs with a flip kit on my old silverado, and was thinking about going with the same. Any thoughts/ideas?

[Mike]

Go with a different band of spindle is you want to do it that way. Belltechs push the wheel out a bit and mess with the steering geometry on NBS.

[LftdBlue04]

Originally posted by MtotheIKEo
Go with a different band of spindle is you want to do it that way. Belltechs push the wheel out a bit and mess with the steering geometry on NBS.

I would go with the DJM 4 inch lower control arms instead of the Belltech spindles.

[Lay'd_Out]

Originally posted by OklaTXN
I would go with the DJM 4 inch lower control arms instead of the Belltech spindles.

if you do that you need some rubber band tires and the proper backspacing for 22's or it will rub and it still may rub some

i would do a 3/5 on 22's

check out mcgaughy's 2" spindles if you want to run spindles