First component failure w/ my bags

[BeerMonkeY]

something finally broke(kind of). was on my way home the other nite from work and i notice front of the burb leaning, glance at pressure gauge and its only got 30psi and im like wtf , maybe i bumped the switch turing on the heat ( actually had to use the heat, first time since winter) so i hit it back up and it goes right back down, this time to 0psi, i pull into a gas station hit it up and it sounds like im hitin it down w/no mufflers, ends up a zip tie i had holding the gauge lines up broke and 1 line got on the exhaust and melted it, couldnt fix it there so i just drove home lopsided. i just have it rigged up now with a peice of melted closed gauge line on my valve. so is there such thing as a coupler so i can just cut out the part wth the hole in it , or am i gonna have to run a new gauge line?

[Izzy]

1/2" ptc splice
http://www.innovativeairsuspension.c...on=show_detail

3/8" ptc splice
http://www.innovativeairsuspension.c...on=show_detail

1/4" ptc splice
http://www.innovativeairsuspension.c...on=show_detail

[Beyond Static©]

werd to those line splices. I need one also

[lunchie]

3 feet of line and a few splices are as necessary on a bagged truck as a 4 way for changing wheels on anything else. I dont care how well the system is plumed, sooner or later, something is going to vibrate and either crack, or rub, or melt.