LinkBack URL
About LinkBacks
Reply With QuoteYour gonna have to trim the spring cup and upper bump stop mount.
|
|
|
This is a discussion on Baggin front of sierra within the Street forums, part of the General Discussion category; Aight guys on an 02 sierra, what problems am I gonna run into when baggin the front? I've got stock ...
Aight guys on an 02 sierra, what problems am I gonna run into when baggin the front? I've got stock arms running conti 2600s and kp cups. let me know what all is gonna hit that I'm gonna trim, trying to get the front done as soon as I get this compressor here.
Last edited by northplayer13; 11-21-2005 at 09:23 AM.
Your gonna have to trim the spring cup and upper bump stop mount.
and thats it? What about fender wells? Anything about them? Running a 20" rim with damn small tire. Don't remember size.
You can lay frame in the front w/ the factory fenderwells in tack if your running a 255/35r20 tire.
You'll also have to mod the sway bar mounts and cut down or replace the factory lower bump stop w/ a smaller one.
Originally Posted by chwelch
Do i have to replace the bumpstops or can I just ditch them? Also can I take the sway bar off since i'm running fbss?
leave the sway bar on
Buy me
how should i make new brackets???
I removed my sway bar but I'm also running aftermarket lower control arms and i couldnt get the swaybar to not rub on the bags... Hell the sway bar mount that was welded to my control arm even rubbed the bag after I took the sway bar out. Most people that I have seen just shorten the factory sleeve down and use a shorter bolt in its place.
still dont understand
Ditch them, the mount they go to has to be trimmed off.
Keep the sway bar on but run shorter end links.
Is there a shorter end links you can buy or just cut the factory ones?
I've done both. Energy Suspension makes them in lots of lengths. With the ART Strong Arms kit you cut the stock sleeve and they provide you with a new allen headed bolt that's 2" shorter(pretty sure that's the length).
whatever you do, run a sway bar. Dont leave it off. It makes a big difference.
loose the bump stops, and take the sway bar and flip it over the so the left is now the right and visa versa and use the stock end links, thats it for those two items....
2000 ECSB, 5.3, magna flow cat back, some beat in the back and a killer front stage
SO just switch the left and the right and that will work?? Anyone got pics of different ways to do it?
does anybody have any pics of their front setups?
Here's a pic of KP cups with DJM LCA's.
anyone got pics of the sway bars
Posting Permissions
 |
Bookmarks